Viewing all customer Discussions for:

Other

It is the lock part for the glass sliding door, made in New Zealand. I cannot find one that's remotely close online. Thank you very much.

Hi, I am looking for the part that screws into the screws into the unused side of the door to lock it in place. Thanks!

Looking for a anderson balancer # 11600-17 h341089 Thanks Dave

I have windows that close like a van door. The parts I need are the moveable hardware that slides up and springs back down to remove the window for cleaning.

Hello from TN, Really need some help. Top locking mech. stuck in the downward (almost locked) position. Something inside the set broke and I would like to replace the whole piece, just can't find one the same size. Please help - Photos attached. Thank you, BW

Hi, I am looking for a Mercer slide window lock kit, I am also needing another window lock, please see attached picture. Thank you.

I really hope you can help me. Thanks in advance. *Storm windows, the rubber gasket is all disintegrated and rotted out. Need to replace it in 7 storm windows for grandmas house. *For Single thick glass (or ssb), less than 1/8 thick. Need it to sit in the channel 1/4 inch tall. The rubber can only ... (cont.)

Hello, I'm looking for a replacement for the T-Handle for my Milgard casement window ideally in bronze color. I bought the Milgard window in 2011. Thanks in advance! Eric.

Hello, I'm looking for a Lock Box, I believe it's called, as pictured it has 50/92 on it. For a double french door that swings out. It engages security pins at the top and bottom of the door. I also need the handles and plates as shown and the white latch is for the opening side windows. Thanks! ... (cont.)

Looking for replacement Snap-in Vinyl glazing for a multi panel patio door that was made by Mi Windows and Doors. See attached pictures and note the snap-in flange has broken off. let me know if you have any ideas for this. thanks. tom

Hello, please can you tell me if you have 2 channel balance's and to include 2 plastic inserts as in the picture. The windows weight is 24 lbs. Let me know if you need any further info. Thanks Stuart

What item can I use to replace the mortise lock?

Looking for weatherstripping for a metal threshold. Have attached photos. The spline that fits in the slot is 1/4" wide. The length to the top of the "D" shape is 9/16". Thanks. Susan

spiral spring with hook on the bottom that attaches to bottom of window.

ok.. I am repairing newly bought home windows that need attention, single hung. I closely match the S380 except the bottom channel shoe dim is not 1" but 15/16". Also the flat side is alittle different. So question, is this a show stopper or is there another option? Thanks for the input. Also ... (cont.)

These are KK windows and the strip has a number 24H/D Looking for replacement

I have a set of rollers that look like your 81-098 or 81-244. Unfortunately, in removing them.... the rollers were pretty much destroyed. The dimensions are as follows: Length: 2 3/4" Width: 5/8" Height: 1 15/16" Roller Diam: 1 1/2". The rollers are metal, not nylon. Please advise what I ... (cont.)

I have KK windows and the strip on the inside that holds the window in place is getting old or has gaps due to poor window placement. I had a person 5 hrs ago come out and replace a strip, trying to order those so I can R2 in some of my windows.

The latch is broken and I am unable to find one. This latch is on block windows in basement and is on under side

I don't have a Picture. In the description it says LF, but I would prefer RT if