Viewing all customer Discussions for:

Other

The screen doors are probably 30-34 years old. The glass on the doors says Guardian. But nothing on the doors or screens. I am looking for 8 replacement rollers.

Hi. Here is what I have. All the ball bearings fell out of the side, grooved 2 drawer cabinet. They are 12-3/16" long and 1" high. Is your product code #32-223 the right replacement? If so, I guess I'll need the four to replace for the 2 drawers. Thanks in advance!

WE are trying to replace the rollers. There two sets per window. The rollers diameter is 3/8" and the width is 1/4".

Hi. I'm looking this sash guide and i wasn't able to find the right part.

Please see attached photos. My issue is that the hinge on the door strikes the track and won't close completely. The pins on the door are spring loaded and apparently can't be adjusted like I've seen on other manufacturer's doors. As such I'm unable to adjust the height of the door so the hinge will ... (cont.)

Two of the rollers on this shower door finally gave out. The roller surface is flat and I think 3/4" is the size. I think the thickness of the roller could be important. I think the rollers from Product Code 10-152 looks closest. I would just remove the rollers from the bracket. Do you think that lo ... (cont.)

Replacements

I am looking to replace this storm door lock set. Do you anything that would work, brass is good but I would prefer antique brass finish. Thanks George.

Hello - we have 22 year old General Aluminum windows - the rubber seal on the bottom of the windows is flat (used to be round). Can you please tell me if you carry them - and what the part number is?

We need the right side catch for Forte storm door windows.

Went to clean and it snapped off. Portion missing from part in photo has 2 screw holes

Didn't see anything on your website, but would you have something that might work for a replacement corner? It measures for a 3/8" x 1" screen frame. The overall length is 2-1/4". The insert part to the frame measures 5/16" thick x 7/8"w x 1-1/4" long. Thank you! Randy

looking for a replacement handle to my 35 year old doorwall. This was originally purchased and installed by Eagle Window company. The handle is 11" and the holes seem like 3 15/16. It is square and wood and a black metal squared off base

I am in need of some of these slider clips which hold our lanai sliding windows in the queue on our WeatherWall window system

I have these heavy metal bifolds. When the doors were taken down to redo floors, parts got scattered. It had a bar on the bottom with pivot brackets. Do I need to put the bar back or can I just put pivot brackets? Can you give me replacement parts for both? Thanks so much.

I'm looking for a window balance in Anderson it says on it BK 14 ?8?89 and I think it has a 627 number on it to here's the picture of the flange

See dimensions on photo of patio door wheel assembly. Wheel is metal

I need to replace the Spring Balances in a Euro 2000 Double Hung Window. I can't find anything online about these windows, but the spring balances and jambs look almost indentical to the Alside Windows. I was able to pull pieces of the coil spring out but the part numbers and any weight markings a ... (cont.)

These bypass shower doors were purchased from Home Depot in NJ about 20 years ago. There are no markings to distinguish the manufacturer. I need to replace the rollers and screws. I called custimer service today and they told me to send pictures. That you might be able to tell what I need.Thanky ... (cont.)

I am looking for Hurd part number #40055 Casement Crank Operator. If you have, please quote price with shipping to 80027. Thanks. Angela