Viewing all customer Discussions for:

Other

The house was built in 2015.i can't find the roller on the site. I have plenty of pictures. These are from a sliding glass door installed in 2015.

I'm looking to purchase two new window balances, as one of mine broke. The Milgard window is 40.5" wide and 26.5" high, measuring the actual window that comes in and out. There balance is 24" when you measure the metal part, and it is 25" when you measure including the plastic ends. ... (cont.)

Good evening, I have a worn out latching mechanism on a Garden wire sliding door. The information on the handle is: Sash Controls, Ferndale, Michigan on the bottom of the Handle, number 22650 on the top, the color on the handle is a bronze type finish. This door does not have a key lock. ... (cont.)

I have a door handle that is broken. There is a log on thumb latch piece "MG". Also on inside of handle plate is "eu4" This also has a sticker inside that says "18 June 2016"

Lock for Truth 40538 and replace the arm. I'm not sure which arm order. Attached are some photos, I believe the arms measures between 14"-16".

Is there a way for me to order a full replacement lower sash for this window? Thank you

Looking for balance replacement for this original balance. After speaking with customer service, they stated it needs to be custom, with a 15-044 attached. I am looking for a quantity of (20)

HelloSorry for the poor quality pix but it was the best I could do.This window is approx. 22 X 32. It's a International Window casement type.I'm hoping for a top/bottom set. Regards, Harold

I need two balances for my kitchen window. The window is single-hung, non-tilting, and the dimensions are approx. 50" w x 32" high. I have opened an on-line account so I can purchase the balances once I know what to order. Please advise

Before I remove these doors I want to try to repair them. Here is a link to the parts I am asking about:https://photos.app.goo.gl/cbQMRLUs1QcpNkSe7These are for bifold doors. The slabs are still in decent shape but very thin, not like the thicker slabs you see now. I will attempt to refresh them be ... (cont.)

I am looking for this part. Wondering if you can help me.

I need a replacement crank. Do you have any like this?

I have Anderson sliding doors 3 panel they were installed in 1999 I need the weatherstripping that goes on the side of the sliding door and meshes with the stationary door I tried Anderson they say the no longer make it I took pics there not the best I tried I would need roughly enough to redo abou ... (cont.)

The assemblies are white plastic, brass concave wheel, 1 9/16" long, 3/8" high, 1/2" deep, 1/2" diameter wheel. Each one is held in by the corner screw that I believe also holds the brown aluminum frame together.

This is what I 'm looking for

I am looking for the seal that goes behind an aluminum strip. 1 and .25 inch wide with a round seal at the end. Salt water application.

Please, advise on these old rolls for sliding windows.

I know the addition to this house was built in 2006. I have several operators that need replacement but I can't seems to identify them. Hoping you have a suitable replacement. Thank you!

S390-23 My top shoe looks to be the same, the bottom shoes' measurement is 1 1/8" mine 5/8" is this available or will another one work

One side of the window coil broke and window not staying open firmly. I don't know what coil or parts needs to replaced. Can you please help in identifying the replacement parts from the pictures