Discussions for Other : SWISCO.com

What replacement part do I need to purchase? Thank you, Thomas

Pella crank cover and lock lever - Black

Hi, I'm looking for a Pella replacement crank cover and lock lever. Please take a look at the 2 attached photos and let me know if you have it available in Black finish. Thank you, Magdalena

+1

Marvin Window operating mechanism

Etched number A1042000163. FRC247. CIC- 6 10. ??? The mechanism works but is stiff, however the small arm (see photo) is detached and prevents the window from fully closing unless I push it out of the way with my finger.

+2

Channel Balance

Here's what I got: -- Metal part is 30 & 1/2" in length -- Non-tilt window -- Balance width is 1/2" -- Slider top fitting has plastic tab that hooks onto frame metal tab which to grabs and hold "balance slider" in the frame track when metal frame tab is open. Does not grab balance slider ... (cont.)

+2

Difference between pivots shoes 15-152 and 15-129

Hi, In spite of knowing that I needed the 15-129 tilt window pivot shoe, I somehow ended up ordering the 15-152. However, after going over both of them with a caliper, it seems that the only material difference between the two is that the 129 has a metal brake while the 152 has a plastic one. Can yo ... (cont.)

20 year old Milgard casement weatherstripping

I don't see similar profiles in your video. Can you help me identify what might be a replacement and what measurements are needed for the unusual profile. I cam send the original Milgard invoice with the window stock number if that helps. Thank you!

+2

Glazing bead for Atrium fixed windows

Need 4- 8' pieces of gazing bead

Bifold top pivot

I had some work done at my house and they removed my bifold closet door. It has a part similar to the top pivot 23-306. Does that part hold the pin in the top of the door in place? Or does the pin go in the circle and the pivot move with the door when opening and closing? I'm clueless! Also, do you ... (cont.)

S4112 PEACHTREE MULTIPOINT MORTISE LOCK

I am looking for a S4112 Peachtree Multipoint mortise lock

Window part inquiry

I am trying to locate the part circled in the 1st attached picture. (Lennar 2) The 2nd attached picture is the parts sticker for the window. (Lennar 3) the window we used in the picture is in a office trailer that has been delivered to a customer. I'm told that the part we need is similar to this ... (cont.)

Mirror door track

Which part will work for this track. 72 inch. Nancy

Commercial door weatherstrip

I had purchased the 58-075 but it was too small mine needs to be wider around 2 1/2 in wide and 7ft long hopefully you have the option for me

brown manual crank handle and housing

I want to see if you have this in white with the handle that sits into the housing so it doesn't stick out. Last time I researched I found TH-24082 Nesting Crank Handle -Entry Guard Operators, on the swisco website.

The sliding glass door will not lock.

The sliding glass door will not lock. The mechanism seems to work inside the door. The latch on the door jamb looks like there is a lot of wear, and the latching mechanism does not engage

Casement window lock

I am looking for the part that attaches to the window the the window lever slides into in order to lock the window. Attached is a picture of the locking mechanism. I need the small plastic piece with 3 holes that is attached to the window.

Kolbe Kolbe patio window seal

Need to replace all weatherstripping on 9 3-season porch windows. It measures 1/4'deep and the facing measures 1/4" also. It appears to be flat facing, but it is 34 years old! Looking to determine best replacement fit. Thanks, Jim