Viewing all customer Discussions for:

Other

Please help identify replacement based on attached photos

Overall length 28"

2 1/8" long 3/4" wide 3/8" - 1/2" Thick

I need to purchase Four rollers and related parts for a older Pella door. Can you determine this by the serial Number IGCC IGMA CIG-2 F 0811.The rollers on it now are the "Flanged Type"Rich

I have a 3/8x 29" spiral tilt window but can not make out the color. The sash weight just under 18lbs. Which color co I need to order?

I believe the dimensions of 40-198 work but the dead bolt is significantly different.

I believe this balance is obsolete and hoping there is an alternative. Thanks in advance for your help.

1717r inside part

I need multiple rollers for these pacific industries sliders. I'd like to get rollers that will fit in the center of the larger slider for support to stop the sagging. Also need single hung rebuild kits for some windows. Please contact me as soon as you can thanks

Weather stripping for casement windows. Sent 2 pictures of the profile and dimensions of the weather stripping.1 picture of the casement window with the weather stripping in place. The insert groove is a .080" depth and .334" width. The weather stripping is a rigid vinyl plastic. Which products woul ... (cont.)

Handle with up-down sliding lock mechanism.

The part is 17" long. Angle up in back to screw ow. That's what broke off

I am looking for the attached parts

Took a picture of what I could find of the broken parts. The sash balances have 36ds 49L stamped on them and the cam pivots are about 1 13/16 high 1/2 wide and 13/16 deep. Hopefully you can help me find the proper replacements, I would appreciate any help!

Looks like the bottom hook of our double slide mortise lock is broken. You can see in the pictures though. Let me know what you think and if you all have that part. Thank you very much. Dan

Hi - I was hoping you could help me identify which balance and pivot shoe I need. I would like to buy enough to fix 2 windows (upper and lower sash). I'll order more if i'm successfull installing them ! I believe the pivot shoe # is 530CSB

This is a soft close hinge, can you please provide a part number. Thank you

Can you provide the window gasket rubber trim ? And any information to help me install the gasket rubber trim and the stops?Roto number on stop is G2-strkr-*11 casement style.Thanks so much wv

I am looking for this part! I was given your company as a place to start! Thank you!!

Hello - can someone help me find a replacement for this operator? I'm looking to replace it with a white one. Thanks