Viewing all customer Discussions for:

Weatherization

Hi, what part should I purchase to replace the strip in the attached photo? Windows are Simonton prison replaced in the year 2000

I have a home that was built in 1943. The doors have been replaced but prior to my purchase in 2010 (they are Stanley doors - I'm unsure of the model). The weatherstripping that is currently attached is done so with an adhesive (not screws or nails) and is starting to break away. Try as I might I've ... (cont.)

Please let m3 know if the compqny has a replacement of this exterior pane window stop thwt I need. I need about 260 linear ft. I purchased a similar one but is not working well.Thanks,David

These are wenco windows from the 80s(?) Just replaced the jamb liners and all the vinyl parts between the upper and lower sashes are shot. We have a larger window with sheetmetal in the same spot but it looks possibly home made.

Balcony door weatherstrip. Fits in channel in the door frame. Inno windows and doors.

could you give the rest of dimensions for 58-182. overall height and dimension from round bottom to t insertion strip?

Hi, I wonder if you can help me to identify what type of seal I should have. Thanks a lot!

Need 1in extruder silicone rubber for Marine tight seal hatch.

This seal runs along the top and left and right sides of the window frame. Do you have anything that will work to replace it. I have included a photo of the groove in the frame that receives the weatherstrip. Thank you for your help.Marc

Hello, I am looking for replacement rubber seal for the bottom of an entry door. Please see attached images to help!

The seals on these windows are in desperate need of replacement. If you have a list of known parts for these windows I'd appreciate any info you have on them! I already have purchased replacement pivot bars for them from you.

My home was built in 1994. The exterior doors are steel (I think Stanley doors) and the bottom weatherstrip is a black rubber strip that seems to be embedded into the door bottom. Can this be replaced? If so, what product do you carry that can replace it? Mine was starting to peel off. I really do n ... (cont.)

Door is W0339eFCD ....therma tru fiberglass door...hinges are on the left....I need weather stipping for the frame of the door on the right....door opens inward with its hinges on the left side of door....I need only weather stripping for the left side of door frame.

Trying to find this bottom seal for tilt windows. If not possible, maybe a replacement? Measurements might be slightly off (20yo windows). Base strip: 3/16'', Height: ~3/8'' or ~7/16'' Any recommendations? Thank you!

for model no. 062418

I need weather stripping for my windows. Photos of removed weather stripping were taken. They are Survivor 96 double hung windows. Need enough for 6 windows. Each piece is 37 inches long.

I need to replace all my lower windows weather stripping. It looks like the windows are KeepSafe. If you could help me find the stripping I would appreciate it. Thank you!

31years old and the weather striping is falling apart. Please advise what replacement WS I can use

I have Andersen (1974) casement windows. The bubble seal came loose on one of them. My question is do I need to buy the glue on type or will the snap on work also for this year? Thanks

certainteed double hung vinyl windows installed 1999