Viewing all customer Discussions for:

Weatherization

Door seals

I have a pair of 1978 steel entry doors that need new pvc or vinyl sweeper inserts that fit into the existing track on the bottom of both doors. Can you tell me where I can obtain this? The door is 1.75" thick. The gap at the bottom of the door it displaces is approximately .25".Thank You,Dan ... (cont.)

Was able to find most of my parts easily, with 2 exceptions: 1. Plastic clips on the top of (left-right) slider windows 2. Wool pile weather-stripping, measures 3/16" (width) x 1/4" (pile) in gray 2a. product code 58-127 is the proper dimension, but wrong color 2b. pictured are two different ... (cont.)

We need to replace the weatherstripping on our Casement windows. They are certainteed windows installed in 2005.

The etching on the glass states that these are Eagle windows manufactured in 1998. I'm not sure what model of double hung windows they are since there is little info out there re Eagle windows. I need 2 types of weather seals as shown in the photos. The 5th photo is A, 4th is B and the others are s ... (cont.)

Hello Do you have any replacement whether strips that would work on my windows. Please see a photo of the whether strip and the mfg label. And if you don't have any can you refer me to someone. Thank you

Do you have this kind of seal for residential window?

Please advise which T-SLOT FOAM FILLED BULB WEATHERSEAL I should order for right fit for my windows

Hi- Need to replace weather striping for some patio doors- please see photos- of current weather stripping- What would I need to purchase as a replacement? Thank you! David

Sorry for the blurry installed seal two photos. I think you can make it out how they installed. This a threshold seal between the fixed and sliding wood windows. The two rib seals are about 1/4" spacing, maybe 1/8th or 3/16th inch long.If not found, any similar substitute would be appreciated. Whit ... (cont.)

I ordered your 3/16 x 3/16 gray pile hoping it would fit in this slot. I was planning on using that with a double sided tape. I didn't think to look at the top of the door to see if the slot is made to slide the base of your pile in. Any advice would be welcome.

Don't know what will work best in Chicago, this appears to have taken a beating and now flows a lot of water when it rains.

Looking for replacement weatherstripping for 1999 era Weathersheild casement windows. See attached photos. Thank you.

2-1/4 " W x 9' L screen door bug strip replacement. unknown manufacturer.

do you have weather seals for anderson sliding glass doors

I have a sliding glass door and am trying to replace these pieces that go in the channel between the doors at the top and bottom and trying to match them up. Would you happen to have anything like this?

The seal between the exterior sash and main frame

Do you sell replacement paella casement window seal? This window is 33 years old. We suspect ants may be entering house due ill fitting seals. The window is 33" high by 23" wide.

Any idea what part I need? I have several windows that need this glazing gasket replaced. The flat part is 3/8" and it looks like it should press fit into the channel of the window frame. House was built in the Pacific NW in 1968 and has black aluminum frame windows - I have not been able to find ... (cont.)

I am looking a replacement vinyl weather stripping for our old (1977) windows. The part that goes into the slot in the wood window is 1/4", the part that makes the seal is 7/16" Thank you Bob Shoemaker