Viewing all customer Discussions for:

Weatherization

Trying to find this bottom seal for tilt windows. If not possible, maybe a replacement? Measurements might be slightly off (20yo windows). Base strip: 3/16'', Height: ~3/8'' or ~7/16'' Any recommendations? Thank you!

for model no. 062418

I need weather stripping for my windows. Photos of removed weather stripping were taken. They are Survivor 96 double hung windows. Need enough for 6 windows. Each piece is 37 inches long.

I need to replace all my lower windows weather stripping. It looks like the windows are KeepSafe. If you could help me find the stripping I would appreciate it. Thank you!

31years old and the weather striping is falling apart. Please advise what replacement WS I can use

I have Andersen (1974) casement windows. The bubble seal came loose on one of them. My question is do I need to buy the glue on type or will the snap on work also for this year? Thanks

certainteed double hung vinyl windows installed 1999

The weather strip on most of my windows has started to rot. The windows are 18 years old, but the strip is letting moisture into the window sills. How do I replace the weather strip? And what is the cost? Thanks for any help you can offer.

Looking for replacement vertical door seal (exterior side). Glass says it's Caradco. It's that whitish hard pvc/vinyl in pic. Thanks for any help.

We are refurbishing our windows in our 1914 house and will use this weatherstripping on the sides of the windows. We can't locate a source that sells this type of weatherstripping. Can you help?

Hello! I need two replacement strips that were attached to wood and prevented the wood from being exposed to weathering. You can see in photo #2 the location of the two pieces. The seemed to have been attached by glue as there are no nail or staple marks in them and the just fell off as if the gl ... (cont.)

I have wooden windows that has a groove in the wood. The weatherstripping is like a plastic piece that slides I to the groove and the rest is rubber. Do you carry this type of weather stripping?Here is what it looks like. The white plastic is detaching from the rubber part.

the seals sit on the frame and the door slides past them when its closed.

I have disintegrating t-slot weather stripping in my windows. They have no foam inside. The tube is hollow. My dimensions are .188 (3/16) for the T, .3125 (5/16) for the bubble, and .75 (3/4) overall. I was wondering if any of the products you have would work. I am considering 58-182 or 58-183. My ... (cont.)

I would like to replace the weather stripping on my casement windows. Both the exterior and interior weather stripping need to be replaced. I removed a small section of both to be able to get photos. They were not easily removed so I am hoping you may also have a tool to install the weather stripp ... (cont.)

trying to replace weather strip for marvin inswing exterior door. The marvin number appears to be V796 or 15170068 Any help would be appreciated

Small narrow strip in door jam to reduce air leaks. It is part rubber and part brush.

The existing bubble weatherstripping is less than 1/4" in diameter? Probably mid 70's to mid 80's windows??.. Thank you for your help?..Lyndy

window seal top seal

I think the windows are Pella dating from around 2008 they are two different styles