Viewing all customer Discussions for:

Weatherization

I need to replace the door weatherseals on my doors. I have included photos. Do ypu have anything similar that would work as a replacement. The insert part is about 5/16, the v portion is 1/2 inch deep and wide. Foam filled. Thanks

item 58-170B the .250 is the width of the slot? what does the .078 dimension refer to? does the .325 mean that it sticks back i the wood that far?

I'm looking for weather stripping kit . The door is a mid-90s designer series sliding patio door. Please let me know if you have something for this model. Thank you Colin

Pleased advise what product i need. I'm sure this is standard stuff but I don't know what the standard is. Very Respectfully John

I need replacement beads for Anderson CIG-1 2-90 Casement windows (about five 1/8ths of an inch wide) Do you have these? Thanks, Paul

I see your videos about replacing pile weatherstripping on the window itself, but there is some pile weatherstripping on the inside edge of the bottom of the window frame of my Harvey replacement windows. The channel is blocked at both ends due to the contraction of the window frame. How do I replac ... (cont.)

Hello. Our farmhouse has Mastic double pane windows. These windows are no longer in production. I would like to purchase replacement pile weather stripping seals for some of the windows. I believe I need 3/16"x1/4" (https://www.swisco.com/White-Wool-Pile-3_16-inch-x-1_4-inch/pd/Wool-Pile/58-127). ... (cont.)

Weather seal is deteriorated by sunshine. Need replacement for 18 windows.several can be swept away with wisk broom. All should be replaced.Roger

This is the seal around the door of an old Winnebago motorhome. I believe it is the 9/32 x 9/32 bubble strip. I need about 35 feet of it.

Looks like I have 3/16 x (5/16 to 6/16). Do you have this? Thank You! Robert

I have a Lincoln wood door with t-slot weather stripping that slides into the drip edge. The top of the T is 0.1875 inches. The weather stripping has becomes ripped and damaged and needs to be replaced. I would like to know which one would best fit my door. Pictures attached. Thank you! ... (cont.)

Both photos are the same, with #1 showing the ruler better, #2 more end-on of the profile. The profile on the left with one tang is the outside edge seal. The other is the inside edge seal. These are 30 year old windows and I'd be happy to send the cuts if that'd help. Our neighborhood is 22 condo u ... (cont.)

Hello. I am looking for replacement door sweeps for 3 fiberglass entry doors identical (or nearly identical) to those pictured above. I am not able to provide photos of the installed sweeps without removing the doors. But that doesn't seem necessary in this case. The sample shown in the photos is ... (cont.)

Any idea if you have this? The kerf is 1/4" and the bulb is about 1/2". Thanks, Erik

Unknown manufacturer. Installation sometime in the 90's or 00's.

looks like I need to replace my weatherstrip with GRAY PILE WEATHERSTRIP, 11/32" X 11/32". please confirm. Thanks https://www.swisco.com/Gray-Wool-Pile-11_32-inch-x-11_32-inch/pd/Wool-Pile/58-161

Hi, What would be the best replacement for this? Thanks! Seth

Would you happen to have any idea where I might find this kind of weatherstripping. We put the door up in 1976 so it's an older door. I have been all over the internet looking for it. I would appreciate any help you can give. Thanks!

manufactored home metal door.your site shows a product code = 58-170B that looks like mine. need to make sure!costumer service is ???

To whom it may concern,Thank you in advance for your time. Please find for photos depicting foam insert bottom sash.Regards