Viewing all customer Discussions for:

Weatherization

We need to replace this door sweep. I wraps around underneath the door. This is for a McDonald's restaurant.

Weather stripping for pella or weather shield french doors

Can you please identify my weather stripping? I need to order it from you for a standard exterior front door. ThanksDavid

I bought a foreclosure that I think was built around 1996. It has Pella doors with a weatherstripping that is no longer available. I am attaching pictures to see if you can help me identify the weatherstripping. Thanks, Paula

I have an aluminite patio door, likely manufactured around 2000. The wool pile weatherstripping is failing, the bottom flange is likely about 3/16", it seems to have an unusually long pile that is 5/8" or perhaps 9/16". I have 4 similar doors so will need 4 pieces of ~ 84". The doors were manufactur ... (cont.)

Please see photo to help me identify a replacement for weather stripping on my windows. The picture is of existing weather stripping I am replacing.

Hello, I am hoping you can help with the correct weather strips for my windows. Thank you for your web site so i could send you pictures.Dennis

Hi team, Looking to identify the proper size of this weatherstripping for my sliding glass door. I am measuring 1/4" W x 7/16" H. The doors are 96" tall and would need two pieces where they meet together. Please reach out when free to confirm if this seems correct. Thanks in advance! ... (cont.)

steel entry door with a snap in door sweep with 1 1/4" between the kerfs

I'm looking for this type of weather strip on the left of this picture it for a bifold unit

I am trying to find this grey weatherstrip part for this pella window. It is attached to the outer window which seals the two windows together when closed and locked.

Looking for replacement Exterior weather stripping and or sweep for Simonton Windows

I need a replacement weather strip for an exterior wooden door. I'm not certain which of your weather strip is the closest replacement. Your assistance would be greatly appreciate. Thank you.

Hello, I recently moved into a house and would like replace the weather seals in the windows as they have not performed well this winter. Rather than just replace the existing seals, I want to make sure I'm using the correct seal. The windows are combination metal and wood, kerfed, and currently the ... (cont.)

The weather strips are on aluminum windows 1974 construction. Can you suggest an alternate if unable to locate?

I have Gorell double hung 5305 windows and will be buying your part number 58-182 .187 t-slot weatherseal for all 42 windows. I removed a small window to check the size and now can't get it back in. Any suggestions, hints or videos? I am in my 70's and female. Thanks Judy

Going to need 14 pieces of each of the items below.

The kerf is 0.23" wide at top of T and T height is roughly 0.1" above the bulb. Bulb section as shown is oval at 0.35" by 0.2". It is assumed this might have been round. Has double fins for additional sealing as shown

This is from the meeting rail of a double hung wood frame window. House was built in 1988. The widest part is .5 in. The kerf is 1/8 in wide. The slot it goes into is 1/16 wide.

I would like to replace the door seal. I'm not sure if the wool seal has an adhesive that sticks to the metal part. This section was at the top of the door that I unscrewed and slid out of the T-slot. I'm a volunteer for my church where this is located.