Viewing all customer Discussions for:

Weatherization

These windows are from original installation 1995. Weather strip has never been changed to my knowledge. If you know what type this is and have it I will measure all the windows and place an order. Let me know if you need any measurements. Thanks, Frank

We have Milgard Windows that were installed 25 years ago. The weatherstripping needs to replaced but we can't find anyone in our area to do it. Do you have the correct weatherstripping to replace it? Any help you can give us would be appreciated.Thank you,Larry & Helen

I need to replace missing weather stripping on a Peachtree Ariel Casement window installed around 1992. I believe I found the part listed in the following document https://www.pwdservice.net/sites/default/files/arielcas.pdf The part is described as "Vertical Jamb Weatherstrip Kit 351083?* Kit inclu ... (cont.)

Hi, we bought a returned sliding door and some weatherstrip/trim was missing. Company Great Lakes is not in business anymore. Attaching picture, hope you have something that will work. Gap is ~5/8", door is ~1 7/8" total thickness. Not a great picture, hope you can tell what I'm referring to. W ... (cont.)

Looking for weather stripping for Pella Casement window Architect Series Classic, Clad, Model 2. (3571, 2971 and 2571) Windows were installed in 2001.

I am searching for foam filled kerf mount weather strip (bubble seal) similar to this product; 58-053. Do you happen to stock this type of product?

We have 16 year old Loewen multipoint locking windows. I want to replace the bubble-seal weatherstripping. The dimensions are similar to the 58-055 bubble-seal however there is a difference in appearance to the part that is above the kerf (see photo). Would 58-055 work, or do you have another produc ... (cont.)

Pictures of what I have. Need replacement, Pic 1: Shows the end and how it is ripping off Pic 2: Channel width -- 2 quarters fit in Pic 3 and Pic 4 : dimension Thanks. Rajiv

The pile insulation on my doors need to be replaced. When I measure the insulation it looks like 2/16 inch wide. Do you have pile insulation 2/16 in wide? The doors are over 20 years old.

Have two entry doors that need new weatherstripping all the way around. Photos included. Need under the door strips with a c-shape profile. These doors are the original installs by builder Gary Gardner in the early 80's in Medford. My windows are Anderson but I don't know if the doors are since ... (cont.)

Hello there, I got this piece off of my sliding closet door but seems to fit the sliding glass patio door as well. These are town homes so it seems like everything is standard all windows, closet doors etc seem to be the same size. I'm not sure what the minimum footage to order is but I'm thinking t ... (cont.)

we have a Vista Wall door at our retail store that is in need of a new seal. The double door is 7' tall and has a twin set of brushes on only one side. The brushes slide in a track that looks to be about an 1/8" wide and the gap in the set of doors is 1/2". Any information would be great. Hopefully, ... (cont.)

From a circa 1994 Cole Sewell Storm door its a retainer strip it holds the window in place in full storm door...it is essentially plastic. Made to pull out and put in full screen in summer Any similar will likely do Need for top and 2 sides or cut to fit like 15 ft worth

The doors of my house are trimmed out to fit the 81" compression kerf style as shown in your Prime Door Seal Set. Can I just buy just the 81" compression piece from you? I would need a total of 12 pieces. Thank you, Ben

1. Do you slide or push the seal in the groove 2 on the corners do you bend the seal around the corners or do you cut at the corners

Hello, I have a french door in the master bedroom that need to have the side weatherstripping replaced. It looks like it is rubber with a type of fabric covering. It slides into the door and that dimension is 1/4 inch. The other dimension for the stripping is 1/2 inch. Do you have anything that ... (cont.)

Greetings, I recently purchased a replacement strip of bug flap for my sliding screen door. I ordered p/n 59-058 which has and 11/32 wide fitting strip with total width of 13/32 including the barbs. That width is just a fraction too small for the channels on my door, as the strip fits very loosel ... (cont.)

I am looking for the glazing bead for window series 1180/1480/1580/1980

The windows are fine, old but ok. The weather strip has disintegrated from direct sunlight. Cannot find replacements.

I have MI window, the bottom side plastic seal needs replacement, do you have this item in stock? See pic, thanks