Viewing all customer Discussions for:

Weatherization

Looking for weatherstripping to work with 80's vintage Truth casement windows. The width appears to be about 5/16" The angle base height that fits into the track is about 3/16".

All of the seals are falling apart and I can't seem to find one that's intact that I can remove And show you. The interior seals seem to be ok. It's the ones on the windows that are really bad. They appear to be some sort of leaf seal. Numbers on window 00311510444616 CG - 3 4 -11 LOE ... (cont.)

Hello, I've attached a photo of a door I'm trying to repair. The end/edge of the door is a "cap" that is attached with screws and has two felt strips running the full height of the door. Do you think I can replace the felt strips separately or will I have to buy a piece that's the "cap" with the fe ... (cont.)

Felt strip. Looks narrower than anything I see on your site Slot appears to be 0.25"

Hi, is your KERF MOUNT BUBBLE SEAL, 3/8" (Product Code: 58-114) bronze, or black?

Attempting to identify parts needed for window repair

Meed help with finding product.

I need to replace all the weather stripping. I look at the Home Depot/Lowes cant find.Thank You, Brian

Sirs, do you carry this part: white with foam? Thanks,Paul

HI,The base of the wool pile strip is 7 millimeters. I have attached a picture.Thank you for your help.Joseph

Looking to replace weather stripping on my Pella patio door. I would estimate its 20 years old.

Trying to find a replacement seal (between side of door and stationary glass) for a Pella patio door. Don't know the model or serial number of the door, info went with previous owner. Current seal leaks like a sieve. Couldn't get photos to attach to t his message, but seal is bulb-shaped with dia ... (cont.)

Hi, I have added 2 photos of my main door rubber seal. Please check if you have the same and inform me. Regards

Attached are some photos of weatherstripping that I'm trying to replace. The windows are 30 years old. I believe they are Weather Shield brand. The snap in ledge of piece is about 3/16" and the seal part is about 5/16" measuring from the longest points of the oval. Any guidance would be appreciate ... (cont.)

I need 24 ft of this example seal

Can't find any markings at all. I do know they are vinyl replacement windows that say Permanent Temp in a corner of the glass.Need the weather stripping.Thank you. Tracy

Is this your 58-127 Pile Weatherstripping - If so How Long does it come?

Is this your 58-182.187 T-Slot Fome Filled Bulb Weatherseal

I'm looking for the lower T-slot bubble seal and possibly for lift pins for some windows which I believe are Jeld-Wen dating back to 2003. The lift pin itself is 1/2" long by 0.050" diameter. The base portion is 0.440" diameter. This pin appears to screw into the window's extrusion. If you have ... (cont.)

Need to replace approx 190 inches of stripping shown in photo: two 80-inch pieces and one 30-inch. Width of strip is 7/8 inch. Depth of insert is 1/4 inch. Depth of bubble is 5/8 inch.