Viewing all customer Discussions for:

Weatherization

Can you recommend a replacement stripping for my vinyl windows based on these photos? Looks like a tee slot with foam filled tube. Thank you.

Looking for a specific weather stripping It is a P style Part # 15171136 Part line 272070? Do not know if this is identifiable for you. width is 3/4" Need 220 feet

Trim is plactic and runs the whole length and width of the screen or glass insert. The trim is about 3/4" overall and the 9/32" wide of the retainer that goes into the slot of the door.

bottom seals on south side have dried and become brittle, they slide in/out, can I get a roll of the material to cut as needed to replace?

looking for jeld wen bottom weatherstip windows purchased from menards thanks tom daley was given your website from jeld wen they do not have replacement parts windows to old !?

Hi, do you have a replacement for this door slider insert? It need to be at least 77" long. Thank you in advance. Will Buyers

Hi, I am looking for 72 inches of this threshold gasket. Thank you

Hello,Your weatherstripping looks like our 58-171 bubble seal, but you'll need to compare yours to the dimensions on our product page to make sure that this will work for you. Thank you!

serial number stamped in door is 970905B, Weather strip on handle side of door comes out of the jamb when door is opened

Unfortunately there is no identifier or name on the door. I'll need approx. 70" of weather stripping.

Please find attached or suitable replacement. Thank you. Gary G

I can not find this weather strip kit anywhere because it is an eight foot exterior steel door. Please help.

Just ordered parts for a double hung window (order 1218173). I also need weather stripping for the bottom half. I looked at your selection, but am not sure. Sent some pictures. Hope you can help with a fit.

Warranty number on door is COLO8032-411150323. Storm door sweep rubber needs replaced or entire part. Thanks.

I have to replace a damaged door sweep. I don't think the door is in production any more. Do you have a substitute? Thanks

How do your weather seals compare with the factory models? In some cases I still see light coming through which I assume air can come through. I would like to find a thicker type of kerf mounted seal to eliminate this issue.

Need help identifying and purchasing weather stripping for patio aluminum sliding door bottom.

from a Kolbe window B5809 WSTP Offset bulb BK 706CS

the number on window is 91 3 84 8 mw

I am looking for replacement rubber weather stripping / gasket for the bottom of my patriot windows. It looks as if there is a section that inserts into a grove on the bottom of the window