Viewing all customer Discussions for:

Weatherization

Looking for this pile door stripping for a older Tublite door. Thank you very much.

Have a client with a whole house of old casement windows need gaskets for all

Hello, I am trying to find glazing beads for my Andersen Perma-Shield gliding door. I just submitted a contact form on your website with a description. I believe the door model is 8068L or PSII 8L based on the door and glass measurements and what I could find on the internet. The stationary panel in ... (cont.)

Looking to find replacements that slides into bottom window groove.

This is installed on wood windows from the mid 80's. What can we find to best match? Appreciate your assistance. Thank you Brad

Architect series,1GMAC SX-4-03 Pella SXC 1003 DCCMLH 1Z2025AC50AWHT521SNFRC. I'm trying to find price and availability for the window seal where it meets the frame.The white is hard plastic and goes into a groove in the wood on all sides except the hinge side.

See pics should explain what I'm looking for.. These are only about 1inch thick and about 5/8 sealing thickness. Please help this is driving me nuts.

For holding glass in a metal frame

Will this fit a Pella door.

We have two bathroom crank style Milgard windows that are about 20 years old with deteriorated seals as shown in the attached pictures. The replacement seal that Milgard sent us is shown on the right in the "detail" picture and the OEM deteriorated seal is on the left so the replacement seal that th ... (cont.)

See IMG_2376 for label on door edge. Other three pictures are of the sweep. IMG_2385 is just a piece of the sweep that is "tearing" loose from the sweep.

Hi, wanted to find out if you can make a recommendation for replacement weatherstripping based on the attached, pictures? It is stuck in there and don't want to pull out if cannot replace. This is the original, we are the second owners. Please see the attached picture from the inside that shows a l ... (cont.)

Do you have a part number for this weather stip? Milgard customer service are a big zero in finding me a replacement.

Need a patio door seal from the 70s

Looking for weatherstrip for peachtree double hung windows Ariel 1994-1995 Bottom sash one has straight strip and one has angle strip

Have a 32 inch Cole Sewell door, and the door shoe is wearing out, specifically the T-shaped rubber sweep at the bottom. That is a 1/2 inch sweep, but is there a replacement shoe or sweep that is longer, about 3/4 inch?

This was used for my transom door on my Tiara boat. AmersburyTruth Pt. 32021 doesn't make it anymore. Looking for an equivalent.

I have 6 (42.25"W X 18.25"H) Weathershield crank windows that were manufactured in 2005 and the weatherstripping has or is failing on all the windows. We had a rain storm yesterday and one of the windows poured water. Do you have any recommendations for a replacement weather stripping? I have contac ... (cont.)

I am unable to find replacement bottom door seals for my two 6 ft. Patio doors. I have enclosed some pictures of the seals and also a dimensioned drawing of the seal section. Hope you can help ! Thanks, Dave

Thanks for posting. I'm afraid its impossible for me to say what weatherstripping you need without showing me the end profile of your current sample. If you can do this, we can narrow down possible replacements.