Viewing all customer Discussions for:

Weatherization

Trying to help a customer on replacing lower black bubble seal weather strip on aluminum windows. Diameter for bubble is 5/16" approximate. Let me know. Thanks

Hello, I'm requesting assistance in selecting the correct wool pile weather-stripping for my sliding glass patio door and sliding glass windows. I think the correct product for the patio door is your Gray Wool Pile, 11/32" x 11/32"-Product Code: 58-161 see attached photos labeled "Patio Door 1 & ... (cont.)

Hello again! this is the second piece of brown weatherstrip from the same hung window. It runs horizontally in a groove along the very bottom of the window. That's it. I hope you can help. Thanks!

Hi - I'm trying to find this weather stripping for a 25-year old wood window. It's 1/4 inch wide. Do you have this product? Please let me know if you have questions.

Do you have this in grey or black. The profile of the white one that you have in the photo looks like the same profile is the grey or black one that I have.

My name is Brad from A-OK Services LLC. This weather strip slides into a slot approximately 1/4 inch wide. This is a 7 foot high door. It seems to be a fine brush or felt. It takes 6 strips to do both slider. Please let me know if you can supply this product, cost and availability. ... (cont.)

Purchased 58-135 t-slot weather strip from you company. My aluminum double french doors have metal rails to insert the weatherstrip but all of the ends on all four sides are closed and impossible to insert t slot. The top of the t-slot fits in but I can't get the bottom to slide in when I try to i ... (cont.)

I am looking to replace weather stripping on several kawneer doors we have on are campus. What measurement do you need in order to get the right weather stripping? Thanks for your help

Can you please let me know if you have weatherstripping to replace that pictured in the attached?

Hello, I've attached some pictures of the door and my business shop. Per the health department, I need to get the door gap closed and have enclosed some pictures. Could you please advise as to what may be the best to get he gap closed? We also need to replace the sweep on the bottom. Thank you! Laur ... (cont.)

Renovating townhouse built about 1995. Steel entry door in descent condition, but needs new compression kerf type weather stripping around jamb behind stop. Problem is kerf slot behind stop is almost 1/4" wide. Existing weather strip has 1/4" beaded kerf. Unable to find a replacement with kerf this ... (cont.)

Looking for weather strip for this door from hr.

I built this house myself in 1986.

Good Afternoon, I am attaching 2 pictures of the weather strip on the bottom of my windows. I am also attaching a picture of a nameplate on the window. I am trying to find out which size t-slot I need to buy. I have 28 windows and they all need to have the weatherstrip replaced. Thank You, Chris ... (cont.)

Original weatherstrip from about 1997 has compressed and does not seal. See attached Visions 2000 catalog page for original part ID. Trying to identify a replacement. ... Bill

looking for the wool pile weather stripping. A piece of it is damaged on my Pella Storm Door. See the Pics. Can you tell me which product you have that I can replace with. Thanks

Hi- Can you tell which seals (bubble) I need by the original model number? I have MW DUAL built in 1992 wood windows with bubble seals. Thanks in advance, Tank

The seals have dried out on several windows that get alot of use Do you have a seal that could replace them? Thank you

Hi, the first picture is weather strip for 7 kolbe french doors, and the second picture is of a totally inadequate sweep for a 44" custom door. The 44" door is 1-3/4", the gap at bottom is about 1/2" Do you have something for these? Thank you

I am looking for weather stripping for an Old Castle brand double doors. the crease where it fits is 3/16" wide and the brush part sticks out 1/2". do you have a part number for this