Viewing all customer Discussions for:

Weatherization

Hello, A customer is trying to replace patio door weatherstrip gasket. Can you identify or suggest a pc that can replace the one pictured that has tape on it? Thanks Dave

Please see the attached files.

Hello, I am wondering what type of weather strips I would need to purchase to replace the ones that are currently falling apart? I've included a picture of the model door I have in addition to the failing weather strips. Any help is greatly appreciated Thanks

The rail is nearly 72 inches long and 4 feet wide. It holds two sliding glass mirrored closet doors which bypass each other. Current rail system is bent causing the doors to hang up when trying to operate.

I am looking for weather strip for my Crestline casement window made in 1994. Cheers Mike

I have a T Slot Bubble Seal with approx. 1/4 inch bubble and 7/16" T. Would like to confirm that I need the 58-171 product

We have 10 "Certainteed" windows of varying sizes which need to have the weatherstripping replaced. The windows were installed in 1996 and both the white fuzzy fibers and skinny plastic core which them have deteriorated badly over time. The fuzzy stripping is located on the lower window which can b ... (cont.)

Just recently I moved into an old home with old vinyl tilt in windows which has lead me to researching about the weatherstripping my window has and most info has lead me here. I need 3/16 and 3/16 ,but my issue is the installation video you folks at SWISCO have posted is insightful and covers w ... (cont.)

26.25 LONG BY .625 WIDE WITH TWO RIBS. FITS UNDER AWNING WINDOW.

Looking for replacement glazing strips

glass states Andersen, but there is no decal in jam with serial # and model #. I need weather threshold 1 weather strip and those pieces down side...3 sweeps

HI, I have this weather stripping in 11 windows. It goes into a groove in the rear facing piece that catches the front of the window as it's closed. Not sure how to install it. Also, the measurement in both directions is a hair more than 1/4". Therefore, I am thinking it's 9/32" x 9/32". PLease take ... (cont.)

We have Weathershield casement windows on our home that was built in 1987. We are looking to replace the weatherstripping on a few of the windows. I have attached a photo Any help you can offer would be great! Thank you! Karen

No need for a picture. It's a kerf seal. The kerf in the sash measures 3/32" wide and a bit more that 5/16" deep. The kerf insert of the seal is roughly 3/32" wide uncompressed and 3/16" deep. The seal bubble when flattened measures 5/16" so that calculates to 0.20" diameter - the closest fractiona ... (cont.)

Hi, Simonton window bottom gasket has dry rotted and is crumbling. Window tilts at bottom but top window is stationary. Windows are over ten years old. Any help appreciated

I need replacement weather stripping for CertainTeed Windows. I looked thru your inventory of stripping and I'm not sure what I need. Can you help me?

Looking to find size .The Foam is 1/4 The back pat of insert is 3/8

this is some snip in glazing stop that I can not find. It 3/8 x 11/16 can you tell me what kind of window this comes out of there is not a thing on the window.

Can you please direct me to the bulb seal that I need? it measures 3/8" bulb. The extension is app 7/16" overall is app 13/16 to 3/4. I hope this is enough for you to identify. Thanks in advance

Does the 55-169-4 come in White?