Viewing all customer Discussions for:

Weatherization

Need weather striping for Kolbe patio door

Good morning--I have been looking to replace the weatherstrip on my exterior doors. I believe that your item 58-173 is what I need. I have attached a picture of the current weatherstrip together with a drawing (not to scale-obviously). Would you be able to send me perhaps a 1" piece so I can conf ... (cont.)

Hello, I have attached several images of T-slot bulb weatherseal currently used in an astragal. The T-portion is approx 9/32". Would you please recommend an appropriate model/item code to use in ordering? Thank you!Jeff

Looking to replace door sweep on Pella entry doors, 36" & 34." The same sweep fits each door. I have attached pictures below.

I have a 15 year old pella sliding door. The weather strip that is installed on the sliding door has some tears and I would like to know where I could get some so I can replace it. I am also looking for the plastic latch for my screen door and a screen replacement handle. Do you carry these? ... (cont.)

Hi, I'm guessing the vertical door stripping insert is 58-050 but not sure if can be/should be used on the top of the door. This door is approx 50 yrs old. Thanks! David

Hi, Can you help me get the correct parts to seal my sliding door? A few years ago I pulled "something" out from underneath the door and now it lets the cold air in. The glass has Corado or Caradco on it. Thanks!

Hello, I'm looking for windows sash and windows sealing. I don't know the windows name but I think its Anderson. build in 1990. windows weatherstrip it look like hard plastic between a piece of wood the the side of windows.please help.... Last week I got the weaterstrip part 58-053 it worked for ... (cont.)

Ignore current wraparound weather seal seen on door. Id like to get replacements for the original seals which go into the channels.

I need a sweep for the door going into my garage. There are two shown in this the pictures .... I need the one on the right side.

Hi, This is not posting on your website after multiple attempts, so here's my email. Please help me replace the # 1 pic- shower door bottom seal. #2,3,4 are same window bottom rubber seals.i don't know what to call them. It's 26 inches. I have different sizes windows to replace ranging 24-38 inch ... (cont.)

I have already purchase the felt for the sides but I see the rubber strip on the bottom of the upper sash is falling apart and does not seal. The flat side is 1/2" wide the flange edge is 3/16" wide and about 1/8" tall. Thanks for helping me again. Harold Jenkins

Struggling to find replacement weatherstripping(WS) for older home windows. Can't ID mfr of window. WS slides into a channel, and is not quite bubble type as is connected to both sides of top edge(~ .25" wide). Length of base extension is ~ .25" ... height of pseudo bubble ~ .3". Perhaps bubble ... (cont.)

brenchmark door unit two 32' doors with a tee astrical i need the magnetic type weatherstrips and bottom sweeps and some kind of rubber for the tee astrical door unit is from the 1980

I am looking for replacement stripping for these windows and having difficulty locating.2 broken covers and one window where I can open and close it but crank strips out at end when closing - I.e, you can keep turning after it shuts which tells me it is in bad shape!

Rubber flap on bottom of door attached to a small kick plate, rubber ripped, need to replace

Trying to find replacement window weather stripping. As best as I can measure, Bubble/Foam about a quarter inch Extension 3/8 - Top of I-Beam section extending away from the bubble/foam. T section 1/8 - Small section connecting top/bottom of I-Beam Base 1/4 - Bottom of I-Beam section furth ... (cont.)

We need this weather stripping. We have purchase others from you before.

I am trying to replace the Wool pile and kerf mount bubble. I believe I have the correct ones. My next problem is the bottom weather strip. Attached is pictures of the weatherstrip, the part that fits in the groove also shown is 3/16. Since I am unable to locate on website, is possible for a sub t ... (cont.)

We bought a building for our business that has an old set of commercial glass doors. There is a huge gap in the middle where there is no weather stripping, because of the lock mechanism. (Pictures attached) Are there any remedies? In the winter both doors get totally frosted up.