Viewing all customer Discussions for:

Weatherization

Hi, This is not posting on your website after multiple attempts, so here's my email. Please help me replace the # 1 pic- shower door bottom seal. #2,3,4 are same window bottom rubber seals.i don't know what to call them. It's 26 inches. I have different sizes windows to replace ranging 24-38 inch ... (cont.)

I have already purchase the felt for the sides but I see the rubber strip on the bottom of the upper sash is falling apart and does not seal. The flat side is 1/2" wide the flange edge is 3/16" wide and about 1/8" tall. Thanks for helping me again. Harold Jenkins

Struggling to find replacement weatherstripping(WS) for older home windows. Can't ID mfr of window. WS slides into a channel, and is not quite bubble type as is connected to both sides of top edge(~ .25" wide). Length of base extension is ~ .25" ... height of pseudo bubble ~ .3". Perhaps bubble ... (cont.)

brenchmark door unit two 32' doors with a tee astrical i need the magnetic type weatherstrips and bottom sweeps and some kind of rubber for the tee astrical door unit is from the 1980

I am looking for replacement stripping for these windows and having difficulty locating.2 broken covers and one window where I can open and close it but crank strips out at end when closing - I.e, you can keep turning after it shuts which tells me it is in bad shape!

Rubber flap on bottom of door attached to a small kick plate, rubber ripped, need to replace

Trying to find replacement window weather stripping. As best as I can measure, Bubble/Foam about a quarter inch Extension 3/8 - Top of I-Beam section extending away from the bubble/foam. T section 1/8 - Small section connecting top/bottom of I-Beam Base 1/4 - Bottom of I-Beam section furth ... (cont.)

We need this weather stripping. We have purchase others from you before.

I am trying to replace the Wool pile and kerf mount bubble. I believe I have the correct ones. My next problem is the bottom weather strip. Attached is pictures of the weatherstrip, the part that fits in the groove also shown is 3/16. Since I am unable to locate on website, is possible for a sub t ... (cont.)

We bought a building for our business that has an old set of commercial glass doors. There is a huge gap in the middle where there is no weather stripping, because of the lock mechanism. (Pictures attached) Are there any remedies? In the winter both doors get totally frosted up.

I have some Traco sliding windows and need some felt weatherstripping. The plastic base is 1/4 inches and the pile is 7/16. Hope this is enough info for you.

Rubber on weather strip at bottom of door is frayed. Piece holding it has two holes on inside to screw it down. It's a herculite from PPG. It is a metal piece and not plastic like the ones at Home Depot. Where can I get a replacement piece

Need replacement weather stripping for commercial door.

I need replacement weatherstriping for 2 casement windows

I am looking to replace the weather stripping on my Crestline windows that were manufactured in 1994, having trouble finding the exact weather stripping needed. Can you assist? Jeff

Looking to replace this unique stripping. Looks like your product 58-055 may work but not exactly. Please advise.

trying to find this felt on the inside of a door next to the frame

I'm looking to reseal most of the windows in my house using wool pile. I ordered a test roll to make sure that I had the right size. If I place an order for multiple increments of 25 ft, will they be separate, or will it be in a continuous roll? Alternatively, is it recommend to only use a single p ... (cont.)

Can you help with finding a replacement seal?

Looking for replacement weatherstripping, either same as original or aftermarket item if it improves on the original. Channel on the astragal is .45cm wide that the "foot" goes into. Original metal doors were manufactured by Stanley, house build in 1989. Original weatherstripping is rubber materi ... (cont.)