Viewing all customer Discussions for:

Weatherization

I'm trying to locate a weatherstrip used on Malta awning windows about 30 years ago. It has both rigid and soft parts and came in strips about 5 feet long. Attached is a sketch of the cross section, showing how it slips into a groove in the wood window parts. Bill

Looking for felts for miller sliding patio doors. Looks like 2 different sizes one being 3/16 wide and about 3/16 high and another 3/16 wide and strong 1/4 inch high.

Hard for me to get a good pic but attached what I could. This seal is mostly vinyl but has a flexible rubber portion--curl on the right in photo. The problem is all the replacement kerf type seals are too thick. This one is maybe 1/8 inch when compressed. Wood swinging door--patio. ... (cont.)

Recently I went out on your website to look at some of your products. What I found was just about what I thought I needed for my windows. But I have questions. My vinyl windows were built in 1986 as far as I can tell and are at a point where we have replaced seals (glass) because ... (cont.)

I need to replace the wool pile in a number of my windows. The plastic or vinyl base of the wool pile has essentially begun to disintegrate causing the wool pile to fall out of the channel that runs around window. The wool pile is 1/8" high and the width of the channel it sits in is about 3/16" wi ... (cont.)

I have Alcoa single hung vinyl windows that the pile weather stripping at base of window has basically turned to dust. I have sent pics of the track and a piece of the weather stripping. Is it possible to replace the weather stripping removing the window? I know because of the T shaped desi ... (cont.)

Do you know if the 58-162 will work as a replacment sweep for a Pella storm door? The Pella has a brass looking gizmo that goes on the bottom of the door with a rubber sweep slid into a track in the bottom. I want to make sure this will work before ordering. Thanks, Ray

The seals at the bottom of my white vinyl windows (new build in 1998) are beginning to fall apart and most will need replacing. Photos attached - I don't know the window manufacturer....? Randal

We have several Caradoo double windows measuring 40"x 48" with a third window (landscape orientation) underneath. They were put in about 20 years ago. I think your Leaf weatherseal will work but I am not sure about the grooves fitting. I have 3 images of the two types of weather seal taken from ... (cont.)

Hi, I need to find a replacement piece of glazing for a GA window I have. Attached are pictures of the glazing.

Hello, it looks as if I have white pile that measures 1/4 x1/4 and does slide into a track but I can not find exact. What would be my closest to look at. photos attached. thank you.

Thank you for posting. Please take a look at our 58-164 Offset T-Slow Foam Filled Bulb Weatherseal. It has a slightly different configuration, but its "T" is only 3/16" wide. Would that be better?

Looking for bronze bubble seal for my Alcan Windows.

See photo. Please help identify name or worn part, where to get, how to replace. Thanks. Mary and John

I am a contractor, trying to repair wood windows, probably Anderson, damaged by hail. The insurance company stipulates replacement of the snap in glazing. I am attaching some pictures to assist in identifying the correct part. Thank you.

I have MW windows, Twinseal model from 2001. Is this a replacement for that model?

Looking for replacemnt weatherstriping for Built Best Windows, installed in 1995.

Should I get a finned weatherstrip or a non-finned weatherstrip? We have commercial storefronts with older glass/metal doors, most of the doors are missing weatherstrip or it's totally worn down. They don't seem to have used finned before but I'd like know why or when you would use finned. Thanks ... (cont.)

Hi, I am looking for replacements for the 2 Kerf seals that run the perimeter of my mid 1990's Hurd casement windows. The offset foam filled bubble is the primary and the straight bubble is the inner seal. Can you please recommend replacements? Thanks Ryan

I have 20 year old LP brand wooden casement windows, on which I would like to change the weatherstripping. They appear to have a channel in the middle and flat or round white stripping Any ideas if something will fit