Viewing all customer Discussions for:

Weatherization

The base is about 5/8 inch wide. Has a bulb and a leaf seal on one side. A barb holds it in place. It's from an old Eagle window. Eagle were bought by Andersen for their high end windows. Mechanism is very similar to Andersen A series. I'm looking to replace a bunch of these seals. Thanks. ... (cont.)

Please see attached photos for Airtight windows. As you can see in pictures the weather stripping needs to be replaced. I'm unsure how to remove it and I would also need to find a replacement product for numerous windows in my building. Can you let me know which item to purchase? Thank You. ... (cont.)

looking for rubbergasket that seals door to threshold

I am looking for t-spline for a screen door the same size as strybuc or bixwell16-241. your 59-236 is not quite the same size. Will it work? The groove in the aluminum extrusion is 1/8 wide and 3/16 deep. pictures are attached. The existing t-spline is 11/64 wide and 5/32 deep. thanks ... (cont.)

Jeld wen door sweep

Want to replace gaskets

The measurements are 1/4 x 1/4 and seems to be vinyl with foam inside bubble. The flat part squeezes into track on window frame

Trying to find a replacement for these old glazing strips on Anderson windows from the 70-80s.

Looking for this bead in tan or white

Looking to replace casement sash weatherstrip for a customer. couldnt find any info on the windows but they look like they may be late 80s early 90s. If I were to guess at manufacturer id say they are Kolbe or possibly Andersen. Wood interior and either a composite or vinyle clad. ... (cont.)

The long leg is 3/4

Hi. I need to find a replacement for these two items. The seal on the left look like a 55-106? The one on the right is smaller, it is the strip between the bottom of the top window and the bottom window Open to try another format/design. window manufacturer is unknown, house was built in 1986. ... (cont.)

Bottom sash seals aren't cut properly from previous owners and they're hard as rocks.

I have these old snap in glazing beads that are falling apart. I'm hoping you can use the photos and measurements to find similar or alternative that is compatible. I have photos with the bead installed and removed.

I'm looking to find a close match, I've tried other common options and all are too thick or misshaped, this one is thin and unique to this particular door, thanks!

Arrow curf mounting foam wrapped with vinyl, overall profile 1/2" including arrow

25 year old home with wooden doors. 2-(32")French door sets. 81"x65" 3-32" standard entry doors, 1-36" entry door. 81"H 116.32' of weather strip.

Hi, my name is Bruce T. I have PGT single hung 4000 series in my house and I need the bottom weatherstripping for them. I need 3 that are 35 inches long, 4 that are 46 inches long and 1 that is 51 inches long.

Hello, I have a Kolbe Swing out patio door. The weather stripping that connects both on the outside of the door and inside is damaged. Can you help me identify what I need to purchase? I did find another door with The outside piece on it! Additional photos

I need to replace the seal on my Semco casement windows because one of them is starting to leak. The attached photo is what it looks like which is better than the photos I tried to take. Do you have a seal to replace the ones in the Semco casement windows?