Viewing all customer Discussions for:

39-095 Andersen Straight Arm Operator, 9 3/8" arm

The brand for this one is Andersen, I need to replace both of them, the left one and the right one. Please help me find them. Thanks.

The photo is of the window on the right -- it's the window on the left that needs help. This is a single-arm mechanism (looks like 9 3/8 inches). The little shoe on the end of the arm that runs along the track at the bottom of the window slips off. I wonder if I might be able to replace that shoe, ... (cont.)

Hi, I bought 2 pieces of 39-99. I need the right and left to install. But one seems can't be left side. Do you have this operator by other side? Also I bought 39-331, but it is too long and too big. Or do you have any similar operator? I need the left arm. Thank you

My right hand Anderson, from outside view,Has a rusted pin that the window sits on. That pin slides along the track. It is black and it's trapezoid shaped. The pin goes vertically into the window. It's rusted out. Can you buy just the octagon and pin piece or do you have to buy the whole assembly. ... (cont.)

I need to order a Anderson crank, it has a #105 on arm and # 55003 Do you know of any hardware you have that will work? Thank you very much Michael G

update: my reference # is D7593, I texted a picture to Josh at tech support, I have been on tour site and think what I am searching for is 1 39-094 and 1 39-095. single arm 9 and 3/8 inch long, left and right. please contact me as I am unsure where my request is ? Thanks Tom

Hello- I have some old Anderson windows on a building and I need right and left cranks and handles. Please advise.. I also need handles for existing cranks.

Assisted living facility in Buffalo ny, in search of these window encasemebt arms. Possibly a Anderson window

The operator crank mechanism for my Anderson Casement Windows (looking on right side from inside double window) cracked the crank cover while opening the window. I discovered (I think) that when turning crank, the bushing that retains the operator screw is no longer holding and it backs out of the b ... (cont.)

Can you help me identify this and order the part. This in my bathroom.

Hi I am trying to find these window cranks, need to replace 4 sets. The windows were made by Anderson in the mid 60's. The width of the crank cover is 4inches.

Not sure of the lock mechanism and the plastic slide lock guide. If we can do the window crank as well as the over for it as wellAlert handyman services Robert

Wood Casement Window Straight Arm Operator 0566208 this is for a old Andersen casement window.

Andersen wood windows i need cranks 1left 1right unfortunately my client did not have any more pictures. can you tell me if you have this by picture provided

Anderson window crank.i do need a left and a right.there is a number on the back 7191.2 Thank u

I need a replacement of this parts.

I have Anderson casement windows throughout my home which was built in 1985. Some of the Anderson casement cranking mechanisms are failing. See attached pictures. My contractor/ handyman recommended that I contact you for replacement parts. One picture shows an casement crank arm which is loose a ... (cont.)

I need to know the part number for this, please. Thanks!

Hello, We have several crank assemblies that no longer function, they break away from the casement when we try to crank them open. Both left and right opening. Could you please assist with the correct replacement part? Throughout the house we have painted most of the handles and covers white so idea ... (cont.)

Crank and rollers