Viewing all customer Discussions for:

39-107 Truth Hardware Operator Cover

Hello, i am trying to order a replacement for this old window crank.. it only cranks outward, not inward. not sure if it is repairable? if not, can you pls let me know the exact replace part number on your side? i can place an order..thanks

Looking for a replacement

Looking for a handle and cover for this older Pozzi window Can you help? Jen Weld handle may also work? Also the lock is missing but really not as important as getting a crank to be able to open the window.

Entry guard truth left swing

Need: 2 Brown crank covers1 Crank SPINDLE, with lock wires(the crank is not broken)

My windows crank handle has come "unscrewed." It will screw in and open, but when I turn it to close it comes unscrewed. Not sure if I need to replace the whole thing or if there's a way to get a new handle. I didn't know if it was factory pressed.

I need the cartridge that goes to turn the geats. K/K is on the plastic cover

I found the cover, but can't find the replacement handle...please advise :)

message

Hello, I was able to find a tread for a part that matches truth 40471. Thank you!! Now I am looking for the plastic cover that covers it after installation. Would you have it?

Looking for correct replacement part

1. Both are left windows, 30842R on arm, 20810 on arm extender, 40372 on base, 30830 on gear holder, 45012 on handle. 2. 2 left windows, 1 right. 30744 on arm bottom, 20544 on arm extender, 30710 on gear holder, handles same as other 45012. Thank you!

Hello, I have multiple original windows from my 2002 home where the crank arms are slipping out of the track and need replaced. The windows vary in size but all of them have similar hardware in the "Truth" brand. Hoping you could help ID a couple options. 1: Does the hardware need to be replaced exa ... (cont.)

MARVIN MN USA 01IGCC CBAIGMAC-92 on metal inside window

I have TRUTH Entry Guard casement window operators. The part in question is stamped L30841. FROM THE INSIDE, the crank is on the lower Right. When turned, the window opes with the Left edge moving outward. I need a few new operators, but I want to start with just this one for now as I have no ex ... (cont.)

Hi I'm looking for replacement hardware for United window and door hardware for crank out casement windows. Sorry I can't take the hardware off if I do the window will fall out and not be able to put back in

Looking to see if you guys have any of these window cranks available. If you do, you can also contact me at 805-332-4477 thank you

Review the parts needed for the window crank covers and the Anderson crank (inside of crank is stripped) I need 4 covers and 1 crank handle. Local Home Depot had the comparable "fits" Anderson cranks, but it didn't.

Window crank needed #39-031

Hello, I am in need of the missing crank and plastic cover (that are circled in the first picture). The window that it's missing on is in the second picture. I borrowed the crank I have on the other window and it works fine- it's just missing, as is the cover. I also included the only sticker/mar ... (cont.)