Viewing all customer Discussions for:

39-107 Truth Hardware Operator Cover

It looks like your part #39-324 might be a replacement for my hardware shown in the photos. The two dimensions given in your photo match my piece, but is the width of the plate with the gear mechanism 5" like mine? Also, what about the screw hole pattern?

Need new handles and cover to replace these old "Crestline" ones. Will Truth folding crank handle (39-205) and hardware operator cover (39-107 OR 39-323) work? Thank You

This window was manufactured by Thermal Gard. It has a 9" arm to the left of the mechanism. The gear is stripped out.

I believe I have a Crestline operator with 4054 stamped on the handle. The worm handle will not stay in the operator, looks like a little ridge that kept it in has disintegrated? I need the entire operator mechanism with handle

I have 2 of theses to replace - Truth 20810 Also the hinges (4) The rail has 30751 and 30752. Thank you

Request help for replacement crank assembly and locking mechanism for a casement window (Window #2). Photos attached. Very pleased with your help a few weeks ago with Window #1.

I have a right and left swing and the crank on right side is stripped and will not pull the window in. I would like to replace cranks on both to fix the stripping issue.

I need to get a replacement dual arm operator. Seems to be K/K manufacturer. The distance between screws is 4 7/16 inches. The small arm is 3 15/16 inches. The large arm is about 10 inches. The small arm has a number 20810. Can you advise which replacement part to get. Thanks Albert ... (cont.)

Please let me know what part to order. I will then order five each. Thanks

Hi, I need help identifying this crank assembly for a client. Attached are pictures of the (2) part numbers that appear on it.

Do you have this in stock?

Do you have an operator like 39-031 with a 3 13/16" link arm?

Please check attached photo and advise if you do have it

The gear and shaft for the window is broke off from the rest of the assembly. We also need the latch for the window. It is a left side latch on the window and the crank is to the right side of the bottom of the window unit. The windows are from the mid 90"s. Part number on the latch assembly is 3 ... (cont.)

See photos. Just need to confirm which part is the replacement for this?

I need to replace these cranks and their mechanisms . Not sure who makes them.

I am seeking two(2) replacement crank handles with covers to match existing on mid-1990's Viking Casement Windows. One handle with cover is needed to install at the bottom left position (looking to the outside); the other is located at the bottom right position (looking to the outside). Can you help ... (cont.)

IMG 2319 shows the left window with crank missing. It is the left window, if inside and looking out. The other photos (right side) show the type/size of window operator needed to replace the left window operator. So i'd like to replace the one operator in IMG 2319. Can you tell me what part that ... (cont.)

These are on 20+ Caradco Casement windows in a home we recently purchased (I've included a pic,too). Do you have operators, handles, and covers that will work? TY --Reed G.

Please see the photo uploaded. I am looking for the two parts that are circled in red. It appears that the screw piece is stripped, and the cover is cracked. The handle appears to be fine. Thank you!