Viewing all customer Discussions for:

39-107 Truth Hardware Operator Cover

Please assist us with replacement parts for our casement window.

Parts information: This window is roughly 14" wide and was installed around 1994. The handle has 40085 and 24 printed on it. The window operator has Pat.No. 4,840,075, Made in the USA, and TRUTH printed on it. Problem: The handle and the metal shaft from the window operator slowly spin out of the ... (cont.)

Hi. I have 2 70" tall x 27" wide casement windows with operators like the first 2 pics and then 2 that are 31" r tall by 16" wide and their operators are like the second 2 pics. Can you tell me which operators to order? I need a L/R pair for each set of windows. Thanks VERY much! ... (cont.)

Hello! I'm looking to replace two kitchen window operator covers and cranks in bronze/oil rubbed bronze finish. Attached are my pictures. They are 'Caradco' but I wanted to forward the pics to ensure I'm buying the right cover & crank. Can you look at it and provide your input?

The retaining ring from the handle is no longer working. So I will need the mechanism for this. Long link arm is stamped LH 30470 Short link is stamped 20610 Cover is K/K. I will need cover, but I believe your part number is 39-107

As you can see from the photos I have two windows that use this hardware. One of the windows will crank out but won't crank in. The part where the handle attaches will screw out when I try to bring in the window. We will be completely remodeling this kitchen and will be keeping the window. We may ne ... (cont.)

Hello, I am in need of a few Crestline crank mechanisms. The windows open but will not close. The arm length is about 8-9 inches. Thank you Mark

The left picture is the part I need- just the cover.

Crank operator has an R stamped on it, It is for the left facing window as seen from the interior. Also has the number 20810A stamped on it. Would like to replace this crank operator but not sure which item in your inventory is the best match. Thanks

I would like to make sure I am ordering the correct parts please. I was looking at 39-031 and 39-032. Also 39-107 for 1 cover and 39-205 for 2 cranks. Please let me know what you think.

We have about 7-8 windows that can't be opened and most of the windows are hard to operate. I want to replace the crank with handle and the arm that don't work. Also any other suggestion for making opening window smooth. I have posted the parts photos.

Truth

Hi I'm Looking for the parts with code 31538 entry gard mechanism + internal handal and security clips

I need a replacement crank mechanism for a smaller Crestline window. The name listed on the crank mechanism is Truth. There is a patent number 4,840.075. On the backside of the long arm that connects to the window, there is a stamped number 40574. From the inside of the house, the mechanism cranks t ... (cont.)

I have a window crank 9-1/2" with a 4-1/2 link arm not the 3-13/16" link arm. The window does not close all the way. I had ordered the 39-155 and the 39-156. Do you have the same crank except with the 4-1/2" link arm or very close to 4-1/2" link arm? The picture shows the old crank and the new c ... (cont.)

hello - i've uploaded pictures of the window hardware that i currently have installed in my house...i believe there is a left and right version, as i need the opposite of what is shown in the pictures, with the crank/cogs on the other side of the sill plate. hopefully you can identify this for me : ... (cont.)

The above pictured Truth mechanism on my Marvin Bay window (left looking out from inside) casement has stopped working. I believe the Marvin serial number is 01 1G 00 OBA IGMAC, however, I'm not sure if the 00 are CC because it's really hard to see.

I need to replace hand cranks in 4 windows in my biome that was built in 1987. Two of the window cranks have the following numbers on. 20810 along with R30842 The two other windows that is part of a three window larger unit has only the numbers 20544 on them. This would need to be a right and left ... (cont.)

Need 3 brown covers and 3 mechanisms

Casement window with K&K on the cover. Back right if the gearbox appears to be stamped with 40572 or 40672. Right side hinge, left side lock. Worm gear and engaging helical gear are skipping. I'd like to purchase a new gearbox and a new handle please.