Viewing all customer Discussions for:

39-107 Truth Hardware Operator Cover

Hi there, My client's window crank is not opening all of the way, and it appears to be the roller is dropping into the removal area halfway through the crank. I'm guessing a new hardware kit for this casement window will fix it. Can you help identify which hardware set I need? thanks, Caleb ... (cont.)

looking for replacement regard, truth, dual arm mechanisms. Looking for replacement regard, truth, dual arm mechanisms. Small arm is 3 7/8 from pin to pin. need 1 left. 1 right

selon chat gpt no 20810 ou 20820 ou 20831 ou 20832

Please confirm that this part number, 39–031, is the replacement operator for the truth entry guard, dual arm operator, stamped with part number 20810. Thank you so much!

I have 2 windows that previous tenants "trashed" the crank handles, low profile sash lock, and bearings to hold the crank shaft in place. I've purchased the Sash Locks (p/n 38-075), and operator covers (39-107). Now I need two bearings to hold the screw-threaded crank shafts in the operator bodies ... (cont.)

Do these come in different model numbers or is it a standard size? Hopi g to order the correct part the first time!

I am trying to find a replacement to this older operator. Please let me know if you have an alternative part

Broken crank assembly and cover on older Crestline casement hardware. I have 4 windows with the same parts that are worn (not yet broken). This window is approximately 28in x 32in.

I need to replace 2 of these assemblies.

Note, the hinge is on top of this window.One arm number says 20810. Another arm says EntryGard TruthThank you (in advance) for your help identifying the model of this Truth window opener that I need to replace. The arms look fine, but the operator seems to be stripped. My guess is that this is an ... (cont.)

Either top bar, or bottom right pin broke off & left window hanging by the operator! #on left operator reads 20810. I don't know the brand. Figure I will replace them all, so I don't have to worry about them in the future (I am 64).

Need to find model numbers to order missing locks and cranks on casement windows. Windows were likely installed in 1993. Thank you,Ryan

Hi, What handles are compatible with this product: Product Code: 39-107 Thank you

several windows have bad hardware . the large spiral screw keeps coming out of the seat need help identifying the part

need part number for Caradco window that opens to the right that we replaced in August 2018

Greetings,We don't know the model or the specific replacemnt parts. See attached images.Can you give us some direction?We need two right hand cranks and 2 left.Best regards,Jason

Looking for a window crank and a back door patio lock with a 2 inch set and a 5 inch box set

I measured, the best I could, the long arm being 8 3/4" the short arm at approximately 4"

Roto, only marking is the letter B.

I have some older Truth branded travelers for casement window that need replacement as the cranks have failed The primary part stamps on the travelers appear to be 30841L and 30842R. Would the correct replacements be: 39-031 and 39-032? I am looking for the correct part numbers for the travelers ... (cont.)