Viewing all customer Discussions for:

39-108 Jalousie T Handle, 3/8"

Good afternoon. I have Wright Windows, aluminum, and need two "T" cranks. Can you tell me if I need to fit an 11/32" or 3/8" spline. Thanks Dave

Metal crank with metal knob attacked on crank. Restoring a house built between 1915 to 1024. Have one crank for existing casement window. Needanother one that matches or two that will work. Do not plan to open windows so best looking matchWould work. Thank you. Susan

I have closer mechanism out of window The spline in the T handle is stripped I checked across the tops of the spline on the closer and measures .315 It is identical to your 11/32" splined T handle.....which is .343. Is there a 5/16" spline T handle or Does the 11/32 provide the right clearances and ... (cont.)

Are the Jalousie T-handle gears compatible with Pella? I'd order the pella's but your out of white.

3/8 handle is to big. Please see the picture. help me identify the right crank handle replacement size for my windows.

I need the t handle and guts just like in the picture. The piece on the end has come unattached somehow. Any ideas on where I can get this??

Good afternoon. Please reference the attached photograph. I an looking for turn knobs and screen clips for a Jal-o-vent window.Goid morning. Unfortunately im not able to remove the operater, but have attached some photographs. Im looking for just the crank handle.Hope thus helps..Tim Nolley Please ... (cont.)

I need 11 small T cranks to accommodate window blinds, existing arm has 12 points. Can you give me availability and price.

I need to replace a bronze Gorell casement window 3/8' folding handle with a 3/8" T Handle. Do you have any?

We don't know what brand of windows we have? We installed Plantation blinds and now we need to find 4inch extension's to operate the casement windows. Can you help?

need 4 t-handles for old jalousie windows

Attached is a photo of my operator. Does your replacement unit have the center "pivot" pin shown on the crank body? Is an additional "T" handle available for this and what is the price on that? Is the material aluminum or painted metal of some kind?

I am looking for the crank/handle to open my jalousie windows. My home in Florida was built in 1941. I assume the windows are from that era. There is no brand name listed on them that I can find. Please let me know what part I may need.

Bought a house in FL with jalousie windows. Had plantation shutters installed and the installer said we needed to get folding cranks because shutter frames now interfere with the cranks. Seems all the folding cranks are for 11/32" splines. Smaller T-handle cranks interfere with the mechanism. ... (cont.)

Hi, I recently ordered part #39-104, handle with 3/8" gear bore. Our client is interested in getting folding cranks because 2-windows are in a peculiar location; so that the non-folding cranks are quite inconvenient. Is there a folding crank that is comparable to part #39-104? Th ... (cont.)

Hi. Would you please help me find a replacement for the handle in these photos. The bore hole is 3/8". I purchased the folding crank handles 11/32" but they were too tall for the window frame, I completely got it wrong. Thanks!! Mary

G'day, Have you a short handle that will fit the 39-001/2 window winder to accomodate venetian blinds?, thanks frank

Please advise cost for one window crank. White

I want to replace two long "coffee grinder" type handles on my Jalousie window crank with two compact "propeller" type thumb ones. You show them on entire assemblies. Do you sell them separately?