Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

I am looking for 2 window locks in white and crank cover and handle in white. Locks and crank work fine, just need to replace on a window that was painted and previously had brown window lock and crank.

Do you have this? It looks a little different from what I see on your website.

The part has Truth 45251 stamped on it. The arm is 9" long when measured from the gear. It has Norco stamped oh the crank.

Hello, We recently bought a house with these window cranks which worked fine at first but this one is nowstripped and comes apart if you try to use it. The other one (not pictured) is almost broken as well.We have 2 others that still work fine. But, we need them all to work! Do you have something th ... (cont.)

One operator with 2 screws

The crank stopped working on the right hand window. I'm attaching a photo of the broken crank. Also attaching a photo of the working crank on the left-hand window, which I'm assuming is a mirror image of the one on the right hand side. I think we'd like to replace the workings in the crank on the ri ... (cont.)

We purchased a home 3 years ago and now have four crank windows that no longer work and 4 more where the screws used to attach the crank are missing, Do you know where I can find replacementsBonnie

The spindle shaft of the crank mechanism of our Uniframe garden window has failed and will not re-engage. Company(Great Lakes Window) no longer carries the part. Recommended contacting Swisco for replacement. No parts stickers on window unit. Only part numbers located were Truth (hardware?) 40575 ... (cont.)

I need to identify this hardware for my window sink. The crank and handle is broken for both of my windows.

Hoping you can help me identify this operator for a bay window probably from the 1970s. There's no part number on any of the hardware except for an eagle on the tip of the handle. The arm length is about 12 inches long with a plastic roller on the end. I need two of these.

Hi: See attachment of a picture of my Awning Window Operator. Can you identify the operator and if I can buy a replacement? I do not see a name on the operator, only a patent #4241541 and made in the USA stamped on one edge. Thank You Richard Kunz

Baseplate has #40254 on it. Truth EntryGard. Smaller arm that connects to corner of window is stamped #20544. Gear cover is stamped #30471. Need complete new assembly including crank handle. Thanks.

Truth 36 A90 556008

Hi folks, I would be interested in getting your advice on this particular component. The gear mechanism has stripped, whereby rendering the window in capable of pulling in. From what I read it needs to have a new mechanism. I took the old one off and these are the dimensions. I've looked at prior di ... (cont.)

Hello, I need the replacement part numbers for the casement mechanism, handle and spindle(?) cover (in white) please

Hello, I am trying to identify brand and parts to buy for our windows. These are the photos that I've taken and I need to replace some inside parts as well as the operator handle and covers in white. Can you assist me?

Need confirmation of replacement part. Same dimensions as your 39-171 except arm is 47/8" long not 5". Bottom of mechanism is stamped 45251 and 101509 08:50 etched on back. Thanks for help.

We have a customer that needs a replacement crank operator for casement window. The hinge it will attach to is EntryGard 30744B. I've attached a picture of the crank. We need 4 right and 4 left operators. Any help is appreciated.

I have contractors ion Pittsburgh fixing. Can pick up at local location or express ship

purchased 1990