Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Truth 40574 — left-hand, single-arm EntryGard operator Truth 40575 — right-hand, single-arm EntryGard operator Nominal arm length: 8½ inches Arm configuration: straight arm, offset downward Operator series: Truth EntryGard 15 Series

Need left and right arms Truth entrygard has 40754 on bottom side of long arm

Will crank out but slips when trying to crank closed. note picture is from left window which works fine. Trouble window is the left window

These are Entry Guard Truth from what I can tell but cant find exact match Need all frame parts and the tracks under the moving parts of the windows The frame track is 10" and the window track is 12"

See three pictures attached. First picture shows an operator arm in good working condition. Second picture shows an operator arm that is broken (plate screwed to window broke from handle), Third picture shows the numbers on the back of the broken operator arm (05052003 is date installed May 5, 2003 ... (cont.)

It's a window crank. Inside the crank there is a number 45054

Hi i have uploaded pics of my broken crank assembly it has a part number 45179 on it and it opens from right to left from the outside of the home. Can you please assist with a part number so i can order the crank assembly please and thank you

Hello, Your assistance is greatly appreciated. I need a window swing arm replacement kit for a kitchen window. I have a number that was on the hardware if this helps: 30481-L Could you provide me with a price and if you have it in stock? Thank you,

Hi There,I've attached an image of the operator and guide parts for a casement window that I have. On one of them, the second linkage (not the one directly connected to the operator) has failed due to rust and is now broken. I think I have purchased this operator from you int he past, but can't seem ... (cont.)

Need [R] and [L] casement parts. 30 year old parts need total replacement

description found on the item : Truth 31850 i need one left and another right

Only marking is "RH" on underside of mech. Cover over gearbox does not appear to be removable - one piece casting.I see the brand name "Caradco" on the knob. Distance from center of pivot to center of outer roller on arm is 13.5 inches. Thanks

Hello, I have a client and some of her large casement windows are not closing properly and we have diagnoesed it to the hardware. it seems as if the hinges at the top are pulling from the window and lettign it sag enough where the hinges at teh bottom hit the window frame at the bottom and wont let ... (cont.)

attached our pictures of the type of operator I have on my casement windows. Please advise. Thank you

Could you please help me figure out what I need to replace these parts. I need 2 left and 2 Right windows repaired

I am looking to replace my window hardware with white hardware. The operator works fine so we don't need to replace the full operator. These parts seem to be very old. Can you help me identify white replacement hardware?

I need to find the part in the pic. The arm length is about 12" - single arm - 6 screws - has a roller on the single arm. The original part is labeled TRUTH 14D403

House built in 2002, Ontario Canada. Visible numbers 30114, 30117, 30118.

I have a duplex with older crank out windows. Some need crank handles some need new arms I cant seem to find any info on Rimco brand. Any help would be greatly appreciated.I have removed the crank out assembly for the right side looking out of window.Its says LH unsure why but no numbers.If need mo ... (cont.)

The attached photos are for an operator on a Marvin window that a Truth motor broke -- the crank was broken out of its socket. It has two 8-inch arms, and appears to be EntryGard brand.