Viewing all customer Discussions for:

39-205 Truth Folding Crank Handle, 11/32"

Looking for a replace

I am looking for a replacement part for a casement window at our shop. the only identifying numbers are on the side of the bracket "40825" and on the bottom side "051899 09:15"

Need replacement hardware. Gears stripped and bushing won't stay in unit.

Hello,The vinyl casement windows were installed about 13 years ago to replace aluminum frame ones. We have seven of the left-hand hinge ones and six of the awning style. I'd like to have operator replacements for all of them. I ordered and received five of the "39-226 Male Roto Folding Handles" fr ... (cont.)

30850 on arm,88 on right 35 on left Facing from outside right swing out trow arm 9 1/2crank 3 3 1/4 connector arm 2 7/8 30850 on it

Our house was built in '91 & contains awning windows. One of the handles fell off in my hand when I tried to open the window. The handyman said the internal workings were stripped & I needed to order a new part. We live in a marine layer & most of the metal arms are covered with white (salt? calci ... (cont.)

Hi I mainly need the crank component as it has cracked & wont open the window

I just had a window fall out and bend the operator bar and the hinges. There is only minor damage to the plastic on the window corner. What parts would I need? Window is not even 4 years old.

Crank to no name casement window 9" long arm 4 7/16" short arm . Need 2 right hand swings with covers.

Can do some help me order the correct replacement

I need to replace the hand cranks for my casement windows because they are stripped and no longer open the windows.Mike

Hi this crank handle n operator arm cranks out but not in as threads seem stripped. Please confirm part numbers. Thanks

We currently have the 11/32" crank handles for our kitchen windows and are wondering if we can replace them with the T handle 11/32" so as to achieve a lower profile. Please advise.

I need both set ups. Handles are broken off. I can't get to screws on bottom of operator bcuz of window trim jamb.....

I do not see any names or numbers on the parts.The picture is the opposite window from the one I need parts for because I can't open the other one. I need all the parts that attach to the bottom of the window and the crank parts. Thanks, Jean

K&K printed on operator cover. Entry Guard Truth stamped on one of the arms. Window is 33 1/2" wide and 31 1/2" tall.

Thanks for posting. If your crank handle has a spline size of 11/32", then either our 39-114L or 39-205 could work for you. If you need to replace the entire operator, we will need to see it removed from the window, with link arm(s) in full view.

I'd like to replace the housing and I'd like to replace the cranks with smaller cranks.

two stage....lift up then crankflat at 9 and 3 o.clock to slide on crank

I need to replace the operators on a few of my casement windows. I've attached pictures of the current operator, which says 'roto' on the bottom. I can't find the exact match, but my research looks like 39-091, 39-224, & 39-557 are what I would need. Is that correct? Is there anything specific I sho ... (cont.)