Viewing all customer Discussions for:

40-005 Aluminum Door Sweep, Mill

Metal door sweep is black and is 33" long and with a single rubber that is 1/2 and with a little curve which is 1/2" open this metal part has 6 holes for screws and they are about 6" in distance from one to the other. Anyhting like this ir very similar? If they are longer we can cut them. We need ... (cont.)

Hello, We have an all rubber weather strip attached to our storm door. It is old and needs replacing. It's just a flat piece of rubber that is just over 1.5 inches wide and is about 34.5 inches long. I did not see anything on your website that might work as a substitute. Do you have any ideas/sugge ... (cont.)

Do you have a new handle/ latch mechanism? Do you carry the screen for summer use to replace storm window? Also the gold colored door sweeper assembly.

I need to order the vinyl sweep for my expander. The door model directions is for a Cole Sewell model 1430, 1530, or 2100. The only other number found on the door's frame is 34915091 151150604.

I have a 36" wide by 1.5" thick front door manufactured by KC door. Do you carry a replacement door sweep for this door?Thank you,David

Our rubber sweep piece for our easy vent storm /screen doors rubber had worn off. How do I purchase a new rubber sweep and replace the old broken one are do I have to replace the whole bottom piece. We bought in 10/27/07. George

Please help to locate, Replacement sweep or extender one or both

Looking for a gold door sweep 42 inches will take a 48, brush inch prefered. The front has a matching "brass" rain plate. Mrs Miller wants the matching door sweep.?Gary

We need to replace this door sweep. I wraps around underneath the door. This is for a McDonald's restaurant.

Door does not close correctly looks like the hinge is broken off. Any help would be greatly appreciated. Does it need a pivot hinge or something more.

Hi, I found a 7' commercial door weatherstrip on your site but I wanted to make sure this would be the right fit for my machine. Also is there a part I can use for the weatherstrip on the lock faceplate and the bottom of the door

I am looking for the same as 58-162, except I need 11/16" not 7/16". I need two lengths 36"

Hi - the rubber sweeps in the bottom on my storm door were torn and worn and now have fallen out. Please suggest a replacement product. The door sweep is almost 32" long and needs two sweeps. Thanks.

Hi, No idea about the name of the manufacturer. Storm door is about 16 years old. The sweep is like a squared u channel; 2.5 inches tall with .5 inch wide at the bottom. The rubber us a fixed to this part and can't be replaced. Need the whole part. Any ideas?

My door 36 inches wide And 1 1/2 inches thick What bottom sweep do I need?

how to install weather stripping

Door sweep rubber

Need to replace sweep

Hello I'm looking for inside and outside handle:latch replacements preferably in black for the door model above. Would you plz advise on which parts I should order? Thanks!

I'm looking for a replacement sweep for a Comfort-Bilt screen door, serial number: C0178042.411150518. Thank you.