Viewing all customer Discussions for:

55-017 6' Capitol 800 Series Snap-in

I am looking for this snap bead for my aluminum windows

Windows are 20 years old, found no identification on any windows. This glazing is close to your 800 series other than the little wing is 5/32 from the corner. The picture of your 800 type looks to be less. Any help would be appreciated have 4 windows that need repair. Thanks

No markings on these windows,anyone know 8f this is the capital 800?

We need a stop measuring 7/16 inch by 9/16 inches Thank you

My part is very similar to 55-080 except for the dimensions are slightly different. Overall height is 7/16", glass seal edge is 1/2", and offset hook is 1/16" from top edge.

Thank you for helping me out. I have about 12 windows to do and was wondering if you can tell which type of glazing this is. I believe it is called Capital perhaps. Thank You, Ralph

Hello, Can you help identify this Glazing the color is Clay? Thanks,

9/16 x9/16 looks like old fashion type but about an 1/8 inch down on the flat side it a 1/16 inch groove that holds it in place. I can't find any brand name on window or stip.

Good Morning I'm looking for glazing bead for single hung windows. I will be changing all the glazing bead so if the design will be different that's ok. Thank you for your help and have a great day. Hans

looking for glazing for the transom window above my front door. Built in 2012

1/2, 5/16, 5/16"

Hello, Trying to find a snap in exterior glazing for some windows. I do not know manufacturer. Thickness is .02, but I presume thicker would work. -- Thanks Ken

This was removed from a vinyl double glazed window and I'm looking for a suitable replacement section in white. The windows were installed in Detroit circa 80-90's but my local guy has no luck in finding the manufacturer or any markings indicating who made them. There were some Canadian window man ... (cont.)

Looking for Glazing Replacement Bead . Do not know window manufacture.

I thought I had more pics but maybe you can identify these parts.

I am looking for glazing bead for my double pane Better Bilt windows that I am assuming are original to the house (house built in 1994). The glazing has either separated from the window, waved or is missing in some cases. The glazing has a curved side that snaps in between the window and frame. The ... (cont.)

Looking for 3 parts: 1. replacement lock/latch (img_0757) 2. replacement window clips (img_0758, img_0762) 3. replacement window guides/springs (red tip, 29 in long) (img_0760, img_0761) The windows are Better Bilt, and the home was built in 1992. Thank you!

This snap in plastic modeling for a boat window. The section that covers the window is 11/16. The section that snaps into the frame isi 1/2 inch with a small lip 3/8 of an inch down from where the plastic covers the window. The plastic is shaped in an L.

I could not find any brand or number on the window. The measures are 9/16" x 7/16". Attached pictures.

I'd appreciate some help finding some tan Rigid Vinyl Snap In Glazing for my windows. My house was built in 1993 and has double pane aluminum frame windows with "Old Castle" printed on the aluminum frame. I found a website that had a figure showing "VGBIPFTAN" with about the right shape but I can't ... (cont.)