Viewing all customer Discussions for:

55-029 3' Snap-in Glazing

I am looking for glazing that I think I found at another site, Part 900-17190. It looks like a 3 line snap-in-vinyl bead. Please verify and let me know if you have this and the cost. Looking for approx 50 feet or more.

Need to see if you know what snap in glazing this is? It's 1/2 inch on each side and 5/8

Looking for replacement. - approximately 1 1/2 cm by 1 1/4cm. Beige or tan in color.

Hi, I'm looking fof this trim. It's vinyl and is on a Atrium window. Thank Lee

This is glazing bead for dual pane windows in an aluminum frame. I am looking for a replacement product. This piece has no markings. As you can see it is very brittle. I would appreciate any help finding a product to repair my windows. Thank you.

both sides are about 5/8 in length.

The part looks the same as your 55 029. But the legs on my part are about 3/4 x 3/4 and the color is almond instead of black and white. Do you have something like this

These are NuAir windows. The label says 900 series. Hail damage to glazing. I am not sure if 55-029 is the one that I need.

I found the attached locally but cant verify the shelf dimensions. The other dimensions check good.Do you have anything similar to the attached? Thanks!

have several 6 Kinco windows to replace all the Snap-in Glazing, need your help to ID the part I need to order..see pics of mfg and type of window thank you Jack

I have Nuair 900 series single hung windows (MST: 4566/4577/4564) with milled aluminum glass beading (I think that's the correct term) and mullions. I want to remove all the mullions and, as a result, will need to replace all the beading since the exterior mullions will leave triangular holes in the ... (cont.)

Ordered some parts from you in '11 and '12 that worked out great. Now need some parts for my garden window without mfg name, might be Acorn. The original weather proofing stiles from early 1980's is warped due to UV; and cold wind blows thru in winter, between glass and the metal frame. The parts ... (cont.)

The dimensions of your item # 55-029 snap in glazing vinyl white almost match mine. Do have anything that is 5/8' x 5/8" ?

Hello, Do you carry the type of glazing bead as shown in the attached pictures? Thanks, Andy

I posted this yesterday but believe it was attached to an old post so not sure if it'll get lost so here it is again. I have a customer whose lost a second story upper pane of a SH aluminum framed Kinco window circa mid/late '90's. Just fell out of the frame. Glazing beads had obviously failed ... (cont.)

Looking for the following glazing bead. If not exactly available can I easily substitute something similar?

I would like to match this glazing I need enough material to refit 13 windows or a similar replacement type. Your company was able to supply me with Top sash guides("18-166"; your part number) for these windows which worked so hopefully you will have this part as well. I also am interested in bet ... (cont.)

Thank you for my order of 55-029 vinyl bead. It seems like the original installer used some kind of putty or glue in spots to hold the vinyl. Is this common? It makes it very difficult to remove the entire strip of old bead since the bead is brittle and tatters easily. I have a bit of old bead th ... (cont.)

Do you have the white vinyl bead I photographed? I found some close on your website but was not sure I saw an exact match. the side view dimensions are 1/2 inch and 7/16th inches. Thank you, Bruce

Hello, I have a PlyGem 1500 series window that I need to replace the glazing bead. I'm having difficulties finding it and would like to know if you could help. I attached a pic that I hope helps. Thanks, Cliff