Viewing all customer Discussions for:

55-029 3' Snap-in Glazing

Hello, Do you carry the type of glazing bead as shown in the attached pictures? Thanks, Andy

I posted this yesterday but believe it was attached to an old post so not sure if it'll get lost so here it is again. I have a customer whose lost a second story upper pane of a SH aluminum framed Kinco window circa mid/late '90's. Just fell out of the frame. Glazing beads had obviously failed ... (cont.)

Looking for the following glazing bead. If not exactly available can I easily substitute something similar?

I would like to match this glazing I need enough material to refit 13 windows or a similar replacement type. Your company was able to supply me with Top sash guides("18-166"; your part number) for these windows which worked so hopefully you will have this part as well. I also am interested in bet ... (cont.)

Thank you for my order of 55-029 vinyl bead. It seems like the original installer used some kind of putty or glue in spots to hold the vinyl. Is this common? It makes it very difficult to remove the entire strip of old bead since the bead is brittle and tatters easily. I have a bit of old bead th ... (cont.)

Do you have the white vinyl bead I photographed? I found some close on your website but was not sure I saw an exact match. the side view dimensions are 1/2 inch and 7/16th inches. Thank you, Bruce

Hello, I have a PlyGem 1500 series window that I need to replace the glazing bead. I'm having difficulties finding it and would like to know if you could help. I attached a pic that I hope helps. Thanks, Cliff

I'm looking for that beading in tan....its for a vinyl window

The measurement for each side is 1/2 inch. One side (without the tab) is slightly curved. The side with the tab is flat.

I'm looking for white snap in glazing for my windows. My local home improvement stores do not carry this style. Do you have it?

I need this aluminum glazing bead to reglaze an 5/8 oa igu in a wood sash. the part of the glazing bead that goes into the sash and rests between the edge of glass and wood (the long flat part that is sandwiched between glass and wood) is approx 3/4''. the part that is folded over and snaps into th ... (cont.)

Attached are three (3) pictures showing the broken plastic strip and where it is located on the window. (The size of the window is 59 1/4" high by 43 1/4" wide.) They are plastic border strips on the window frame that cover the top and side edges of the window. The windows were installed during th ... (cont.)

Have a client who needs to replace glazed beading on all her windows due to a hail storm. Not sure which model to choose can I get some help. Thank you

How does one cut this product? Do you have to have it pre cut or can you do it with a special blade/

I believe this is the snap in from rollyson 2500 series? I am wondering if I could replace it with a shape that is more L than this U that will chip on the outward facing side of the U? Please advise if there is another head that could fit in the channel and provide a different external shape. Other ... (cont.)

This is a outside glazing bead from a window that has bead discontinued from the manufacturer HR windows The window that I replaced is the upper window that they supplied that is stationary. It measures 20"X29" The plastic pieces pictured broke as I removed them. Do you have this bead or any suggest ... (cont.)

Dear Swisco, I purchased white window glazing for our home in Elephant Butte, NM this last spring. My neighbor has problems with her window glazing and we would like to see if you have a matching configuration / brown snap in vinyl glazing strip. I have attached photos with measurements. Please fe ... (cont.)

Looking for replacement snap in glazing. Color white. Could not find marking on windows. Windows put in by KBHomes 10 years ago. Texas heat has dried them out. Recent hail storm was not sever but it did cause the glazing to be broken. Very brittle. I did find one label on a window but it look ... (cont.)

Looking for replacement bead for glazing bead. appears to be 1/2 H x 1/2 W (could be 3/8?).

I believe this is from a Champion 3050 window