Viewing all customer Discussions for:

55-029 3' Snap-in Glazing

I have Danvid, double pane windows. Model number is unknown. Need vinyl glazing strips. Please see attached photos and drawing. Color is gray. Rex O

They are just an L shape with a hook lip on the very edge on the insert end At least 30 yr old.

Good afternoon, I have attached a picture of the vinyl glazing bead on my windows. Do you recognize this product and if so, is it available by any chance ? My bead is approximately 5/8” on the curved side and about

this is a black 3/8 by 9/16 snap in to a very old window (year - 86). I need match or something that will work, if there is not an exact match. thanks,

Hi, I need a replacement for the glazing shown in the picture. I do not know the manufacturer of the window. Thank you for your help.

looks like I may need product # 55-029? can you tell? there's no lip, just plain see pic attached- have 2 small windows 17X 20 each 4 taller @ 20X27 I figure I need @ 7 pieces of 6 foot and 4 pieces @ 3 foot??

I am needing to replace some of my window glazing bead it is on inside of windows. One side measures 9/16 inch and the other side is 5/8 inch.The picture shows it from the end so you can see the shape I know it comes in 6 foot sections the flat side is on top of window and the curved side is the sid ... (cont.)

I need to replace vinyl glazing that's been damage in hail storm. The measurements are 0.5" x 0.375"

I am looking for the window stops The trim pieces on the outside of the windows

Hi, I would like to replace the snap in glazing of the windows we had replaced. Could you help me identify the correct item? The size is 3/8" x 5/8" although I wouldn't mind slightly wider than 5/8" There is some black glue? between the panes that I would like to cover. Thanks for your help. ... (cont.)

The size on the snap-in glazing is 1/2 inch for the flat bottom piece by 1/2 inch for the curved part. The flat piece fits under the glass and there is a very tiny ridge just before you get to part that curves up. That tiny ridge "locks" the glazing into the frame. Of course these are aluminum ... (cont.)

Trying to find replacement window glazing for aluminum windows in our house. The broken glazing I took out does not seem to match any of the glazing on listed on your site.

1.This simple rubber strip runs the outside of the window that doesn't open. I'm looking to replace a 70" section. The windows are Atrium brand but I couldn't find a make and model 2.There are 2 delicate plastic clips at the bottom I need to replace. (Picture #3)

Need to find snap in parts like are in the pictures. The only number that I can find is Series: 70 H3

I am looking to find this beading that I have not found anywhere else. I have looked everywhere. Can you help me with the information I have attached? My name is Kristan. My phone # is 210-655-5858. Thanks!

I apologize for the lack of information. We are renting a house and doing some repairs for the landlord as he recovers from surgery. We don't have any numbers or tags. If the picture is not clear, please ask for more. We measured the strip we pictured. The front/left side is 0.5 inches and the back ... (cont.)

Viking aluminum windows, need to replace the snap-in vinyl bead in black.

I am looking to find the glazing and other parts for my 1993 Viking Aluminum windows. Is it possible to replace pieces of the window frame, one of the screws was stripped out? I was able to get it to hold with a longer screw but am not sure if this is when I should just replace the window? ... (cont.)

18 YEARS OLD - MEASURES 1/2" X 1/2"

Hi, I am trying to locate glazing vinyl for Viking aluminum frame windows from about 1993. Preferably black in color. Can you make sense of my pictures? Thanks, Stephen Weston.