Viewing all customer Discussions for:

55-080 3' Snap-in

I had hail damage to my vinly glass bead. The bead is 1/2 inch wide and 3/8 inch high with a small lip of 1/16 inch. I cannot find a manufacturer mark or name for the bead or for the window.

I am doing some windows that II need some glazing strips that looks like part #55 156. We are using 7/16 Ins.glass. That little tab on the backside has to be 1/4" from the top of the molding We did get some glazing strips, but its falls 3/8 down from the top so it goes past the slot to hold in p ... (cont.)

We are a commercial glazing contractor and we were called out to a school to replace a broken window and they will need new snap in bead as well. The maintenance dept wants to keep some stock lenghts on hand due to other windows having very brittle bead as they are in direct sunlight. I am not sure ... (cont.)

I have Alcan windows from 1992 and the material around the edges are cracked and brittle. Do you carry this? Michael

5/8" x 3/4"

Need locking bead for window inside measurements are 11/16 x 5/8 inside measurement to offset is 1/2" slides in along side of glass and locks into grove in frame

Good Evening - I have a weather strip that was torn off closest to the window lock. The window is approx. 4.5' in length. I've ordered from your organization before. I am impressed with your service and execution -- exactly why I am back. Thanks for the help!

Do you carry this? Thanks Jeff

I am looking for glazing as in the attached photos. The measurements are 5/8" across the left side by 1/2" on the right as oriented in the photo. The glazing appears to be a 90 degree right angle and has a small catch on the right side which fits down in the channel between the glass and window fr ... (cont.)

Need Help finding this Glazing Bead

Please confirm part number VGB4920W or correct part number to order vinyl bead. See four attached pictures. Thanks you, Ike

Hi, I have an Alenco window with vinyl snap-in glazing as in the attached photo/profile. Something close would probably work - can you look at it and recommend one of your part numbers. Each leg of the glazing is approximately 21/32" but I don't think this critical. Thanks.

Our home (built in 1983)has some original wooden sash windows made by Hurd. We need to replace some snap-in glazing. The current snap-in glazing is 9/16" by 15/16". Part # 55-156 looks close but ours does not have the "hook" detail. Would #55-156 work?

Trying to find a replacement for this snap in glazing. It is off a windshield from a Mid 80's Formula Boat. The windshield was produced by Water Bonett. outside demension is aprox 5/8". inside deminsion (the one with the tang) is 1/2" Please help

(1) See attached photos for the particular vinyl bead I need. I need to replace sash bread on several windows on the south side of my home; UV rays have made the existing bead (12 years old) brittle and cracked. The windows are "ALENCO" but that company is out of business. SO I need to know specifi ... (cont.)

Hello I saw you helped a desperate home owner out who posted a picture of the glazing that he was looking for and i am wondering if you can help me as well. I am replacing the window panes of a 30 year old window and the glazing breaks easy so I need to have a replacement. Attached are two picture ... (cont.)

We have wood frame windows wich use a snap-in glazing to retain the glass #55-030 very closely matches (within a 1/16. Any experience in this type of application?

A fine-tooth hacksaw (75-023A) is what we use to cut this snap-in glazing in the shop for repairs.

can I get 55-080 in black or bronze?