Viewing all customer Discussions for:

55-080 3' Snap-in

Need about 26 pieces 6? long. Dimensions are about 5/8 x 3/4, white vinyl.

Unfortunately, I have no name, number or identify mark for the attached picture.Hopefully, you will be able to find a close fit or approximation. I anticipate requiring more than +100'Thank youJoe

The string in the balance on my window is broke also on trim piece on the inside is broke. I need teplacement parts

My part is very similar to 55-080 except for the dimensions are slightly different. Overall height is 7/16", glass seal edge is 1/2", and offset hook is 1/16" from top edge.

Thank you for helping me out. I have about 12 windows to do and was wondering if you can tell which type of glazing this is. I believe it is called Capital perhaps. Thank You, Ralph

Hello, Can you help identify this Glazing the color is Clay? Thanks,

The glazing is white. Dimensions are 1/2" X 9/16". The glazing was damaged by hail and I need to replace it.

Can you identify this snap in glazing and do you carry it?

this is similar to the capitol 800 series, except that it is larger on the side that goes into the frame.

Good Morning I'm looking for glazing bead for single hung windows. I will be changing all the glazing bead so if the design will be different that's ok. Thank you for your help and have a great day. Hans

looking for glazing for the transom window above my front door. Built in 2012

I am replacing double pane windows that had broken seals. I have the new windows, but old beading is faded and brittle, and breaks when tryiing to remove. Looking for about 100 linear feet of new beading.

The bead,is 3/4 on one side 1 inch and eight on other snap in bead.

This was removed from a vinyl double glazed window and I'm looking for a suitable replacement section in white. The windows were installed in Detroit circa 80-90's but my local guy has no luck in finding the manufacturer or any markings indicating who made them. There were some Canadian window man ... (cont.)

Snap in measures at about 13 mm x 12 mm. Please help me identify so I can order replacements. Thanks

Hello, my Gapco window has broken part that needs to be replaced. I am sending you a picture of the damage hoping u will be able to identify it and send a replacement. I need two of those. Thank u.

We need to replace some of the glazing bead around our windows due to hail damage. Not sure what we need. Hopefully with the attached pictures you can help me.

Looking for Glazing Replacement Bead . Do not know window manufacture.

I am looking for window glazing beads for an aluminum window. The window is 29 years old and I do not know the manufacturer. I have attached some photos. Thank you.

I am seeking lengths of vinyl glazing bead for older Milgard alum. windows. Picture "a" is an end view of the original glazing bead. Picture "b" is a postit note sketch of the bead's dimensions. 15mm wide outside face, 13mm wide side face that snaps into window frame, and snap-in lip 4mm down fro ... (cont.)