Viewing all customer Discussions for:

58-008 Prime Door Seal Set

Hello, Which is the correct replacement product for the wood exterior door? Thanks

Can the 37" magnetic header strip in the Prime Door Seal Set be cut to fit a 30" wide door?

I'll need about 19 feet of rubber gasket replacement, if you can identify the material from the attached photos. You see the cross section is just about 1" wide, and you see the gasket installed in the door frame. There's a groove that runs all the way around the door to hold the rubber gasket. ... (cont.)

I have a 6'x8' steel double door that has magnetic weather stripping at the top and in the astragal. The side jambs have a compression strip. I can't seem to find the weather stripping to fit either the width or height. I can put 2 36 together to fit the top but I won't be able to get a piece for th ... (cont.)

Which weather stripping do you suggest for out swing French doors? The current weather stripping is vinyl covered foam installed into a kerf, but it doesn't seem to be large enough. The gap between the door and jamb is about 1/2". Light shows around the weather stripping in some cases and the doors ... (cont.)

I am looking for the following Stanley Door Seals. The magnetic top one is 5/8" high and 1/2 wide The other one, which is on the Hinge side, is 3/4" high and 1/2" wide We have 2 doors that require these. The width is 31 3/4" and 35 3/4" Do you have replacement seals that will work? B ... (cont.)

Hello. Which gasket set should I buy for my metal front door? I would prefer not to use the gasket made of foam. The old stuff is about an inch wide and might be 35 years old. Thank you.

It looks like the 58-008 Bronze will work for the magnetic strips. I am not sure about the width of the magnet that you have. I don't know if the jamb strip will work as it is not identical to mine, what do you think? please advise Mark

I have I believe Stanley Wood Framed Exterior Doors the weather Stripping fits in the Kerf and it looks like your 58-008 compression part or the 58-173. My weather Stripping is soft like some kind of rubber. I built my house in 1993. I have 3-36" Doors and 1-Double France door unit that has 2- 36" d ... (cont.)

Greetings! I need your help to replace the door seal - below are photos of the seal. Not sure about the model of my door.On Swisco's website I found that some customers already have asked about this particular type of weatherstripping. Best! Tigran

This is from an older door (35-40 years), wood interior, metal exterior. I need to replace the hinge side jamb weatherstripping.

Need help. I am replacing a weatherstripping product that looks like your 58-008 for an exterior steel front door. My issue is the gap I'm trying to fill is 1/2" ... assuming some compression is needed, I think 58-008 will work per Dave's professional comment below from an earlier online discussion ... (cont.)

Sorry no names and/or numbers on the door.Need side and top replacement seal.

The only marking I can find is a number stamped on the door. 1185-L and it may say CCMC above that. I like to replace the weather stripping around the entire door.

the original seal is rubber. this seal is made of?

The figures shown for the 58-008 magnetic weatherstrip do not show the dimension from the door face to the door stop face. Mine varies from 3/8" to 5/8". Will this model weatherstrip work for that?

I have some 25 year old doors with magnetic seals that need replacement. he doors themselves are metal but I have wood framing. Can I staple or nail the 58-008 set to the frame (it appears as if it will work)? The original seals are glued.

I have a Stanley entry door and the magnetic weather stripping is tore up at the bottom. This is the piece on the latch side. The door I have is a 36

I see you offer magnetic weather-strips for metal Stanley doors. Photos attached show cross-sections end-views of my Stanley weather-strips: magnetic (top and latch side are same) and compression (hinge side). The door is stamped only

This are two seals that I have on my door the home was build in 1985. Can you help