Viewing all customer Discussions for:

58-050 Gray Pile Weatherstrip, 7/16" x 7/16"

I have commercial Tubelite Doors and need to replace the weatherstripping between the door. The backing on the current stripping is 3/8" and there is a 1/8" gap between the doors (not sure what the pile height is ~ the existing weatherstrip is very worn).

Not sure what I need to replace. If I can just replace the pile that would be great. The base of the pile is .125" wide and the height I'm guessing is just under .5".

2 swinging front glass double doors to an apartment building, the one door needs new weather stripping pile. The backing measures 3/8". The pile is difficult to measure; i'm guessing 7/16"to 3/8". i provided photos.

I need 7/16 x 5/16 , I have old double aluminum doors that meet in the middle.i have 3/8 x 3/8 and it just pulls out of the track. Thank you, Mike

I need to replace the weatherstripping on two entry doors to our church building

the hardware is fine. just need replacement sweep.

Looking for help identifying proper replacement for this weatherstripping. Measures ~1/2" across at the base and ~3/8' tall. Thank you.

We have Kawneer Glass door The doors are 7 ft tall we need a total of 28 ft of weather stripping we have two door to do.The backing is 7/16Pile is approx 3/16 but it is pushed down from useThank you for your quick replyRaquel

The door "brand" says Oldcastle Building Envelop" The current weather seal pile seems to be a two strip arrangement held behind a removable plate. The brush pile has worn out and the gap is now wide. So far I have not removed that plate. Looking for any input on what product might directly, or with ... (cont.)

This is between 2 wood doors Which both open

Good Afternoon, I need some weather stripping to replace the weather stripping in the photos. The plastic "tape" that slide into the groove on the door is 7/16" wide. The "fuzzy" part extends out of the door about 1/4" but does not reach the door frame. It does not seal well for air conditioning. ... (cont.)

the felt on my commercial doors are worn. There is only felt is on one door with the other door rounded. the width of the channel for the felt is 7/16 wide the channel is adjustable for height. do you have any felts that I can use.

Please help identify this weatherstrip. Grey 3/8 x 3/8. Thank you.

Hello I'm having real problems trying to remove the weather strip. My windows are metal. Do I cut a grove at the ends to pull it out? I've attached photos Any help appreciated. Regards roy

7/16 or 1/2" wide but need 3/8" depth . . . Thanks . . Paul

Not sure the brand replacement part I need for this comercoal door , measures 83 inches 1 1/2 wide I believe, seems to be one section together..

Need help to find part number I just order product code 58-050 7/16" but that want fit on my door is litter bigger I just got delivery today is for tubelight door

I am having troubles identifying the correct measurements for this weather stripping. I am guessing maybe .437 x .350.Steven H. - Modern Glass

Can you help with figuring out which gasket to order. The gap between the two doors is 9/32 and the plastic slide on the current seal is .37. The door is 84" in height. I am not sure how to replaced the gasket around the locking mechanism.

Hi--I have a business with an old metal/glass door. The building owner seems to have scotch taped this felt weather stripping in the channel. It doesn't work well, and in the winter, my double keyed cylinder lock freezes up, and it's difficult to get in. Not sure how old the door is, but I would ... (cont.)