Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

Hi, I am placing window seals in the Hurd Casement windows. Appears in the website that the old style seals have been replaced. Is that a good assumption? Can you help with the new style seals? Thanks

I need complete set for 2 windows

Hello, We have Pella insert windows that need the seal replaced. What product do we need. I believe we have 17 windows between 24 and 36 inches wide. Thank you,

These are the window seals on JELD WEN casement windows on a house constructed in the early 80's. There are 2 seals on each window, one on the sash and one on the frame. I need seals for 3 windows, each measuring approximately 64 1/4" high and 23" wide. I also need the window operators for 2 wind ... (cont.)

I'm looking to replace my window weatherstrips. I'm wondering for you have these window strips/seals. I've included the photo and a measuring stick next to it. Lower window pictures labeled 1 to 4 For the lower window strip. The strip was not attached to the lower window instead it was at the botto ... (cont.)

Here are the profiles I'm looking for....1000 ft. Of each ....im a home builder and we are responsible for supplying new weatherstripping for an existing home project

Windows are original construction pre 1995. I can not remove the weather stripping for identification WO removing the sash which does not appear to use tilt latches.I can not figure out how to get the sash to move either L or R. In order to remove it. Can u help? Thanks, g

Need Pella sliding door weatherstrip that attaches between the sliding door and the threshold, the door is about 10 years old but we don't have any more info except the attached picture.

Wood, double hung, builder grade windows. Strip is 30 inch long, need for lots of windows. Do you have this and in a roll? Thank you Alex Guess Has two ribs and round part is open rubber hole entire length.

Hi. 2 different items im hoping for help identifying: Checkrail in pic 9184 and weatherstripping on the bottom of lower sash for double hung.

Hi All, Here's a couple of pics of window glazing beads for which I'm looking. The first has a fold over element on top which has fallen off. I'll appreciate your guidance. Best, Note the 3 text line on the one should read 5/16" and is approximate.

Looking for new / larger interior seals. The seals were never big enough to fully seal the window. The seal pushes in with flexible wings then floats in the slot. See pictures for seal and approximate dimensions. Thanks

This weatherstrip is installed at the bottom of the lower sash of a double hung window. It's a high quality window but I don't see any brand.

Oval/Bulb shape with attachment point to one side. No markings.

I need the weather strip for the aluminum threshold of an in-swing Kolbe vinyl patio door purchased in 2003. Dimensions are 5/16 bulb and 5/16 stem. The bulb is a little deformed in the photo. I would think it is round.

Morning, My house was built in 2013 with Hurd windows and doors installed. The weather stripping is deteriorating badly in places. Since I live quite far away from a major town I will probably have to do the replacement myself. I hope you can help me identify the parts (or substitutions).The caseme ... (cont.)

Weather stripping from under a front entry door. 8mm kerf style insert, 5mm brush style sweep. 5mm cross section width of plastic insert. The door underside had two separate rows of this weatherstripping.

I need weather stripping for 20 year old M&W wooden windows for the top and bottom sash where they seal against the frame. A picture is attached. The bulb is about 0.350 inch in diameter, roughly. Do you have weather stripping for this window?

Hello, I'm trying to get some replacement weather stripping for a whole house of windows. I dug some out of one of them and attached the pictures. The kerf is about 1/4" and the flange coming out is about 1/4" and the return is about 1/8"

Need this type of weather strip for a double hung window.