Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

I believe the existing windows are Jeld-Wen. I am looking to source pile weatherstripping for the cross rail, bulb type weatherstripping for the sill and a new compression jamb with internal spring balance. The compression jamb has a failed spring on one side. The jamb is 3-3/8" wide by 73-1/2"/74- ... (cont.)

So... I thought our windows had a bubble stripping, but I found an intact piece during our work yesterday. I looked on the site for "leaf" style stripping... but didn't find a match. Any help finding my window's soul mate? Thanks.

I am looking for a similar product to replace ours, as it is starting to become quite drafty. It doesn't necessarily need to be the exact same, just something with the same type of attachment. In terms of the weather stripping itself, it is basically just three components: the brush, then a rubber ... (cont.)

Looking for trim for the bottom of a hinged exterior door. The base tab is 1/4" long and the bulb appears to be 11/32". Hopefully, you can tell from the pics? At least similar to your product# 58-053 but, looks like the tab is on the edge at an angle.

I'm looking to replace the weatherstripping on my Milgard windows. Milgard windows Series: 3510 casement Product line: 032-167 Please see photos attached.

I have an older home probably mid 1980's with Peachtree Ariel casement windows. They have a 2 piece seal, one which mounts to the frame and one that mounts to the sash. I am attaching a few photos. Let me know if this is enough to recommend a replacement item.

Hi. I'm looking to replace bubble seals on 20-year-old double-hung wooden windows. The bubble diameter of the old material is 1/4 in., and the base extension is also 1/4 in. (See photo.) I'm trying to get a tight seal on gaps that run along the bottom of the lower sash and top of the upper sash. ... (cont.)

No question but comment. Our 20 yr old Andersen 200 series tilt wash bottom seals are failing. The kerf 5/16 bubble seal are a perfect replacement! Highly recommended.

This gasket is pulling out of the windows 9 years after installation

Do you know what goes around the window glass inside and outside? The windows were painted shut, and It is extremely difficult to remove the paint from the exterior stripping are the glass. I will prefer to replace it. I haven't removed it, fingers crossed that you have an example of all three types ... (cont.)

I need to replace some of my weather stripping on my 1990 Dashwood (Canadian) hinged casement windows. Each window has 2 different weather stripping - on the window sash and the window frame. 1. window sash - white/yellow in colour 1/4" OD + 7/32" ID hollow bulb w/ stiff kerf mount of 5/16" height ... (cont.)

I bought patio doors on 11/4/2004. The weatherstripping on the bottom is falling apart. Can you help me figure out what to purchase to replace the stripping? i have the original order tag for the door. It has a number of codes including: wc# 318 00; also:901627-010 dock 78; pri 1892; load 42551; mo ... (cont.)

Hi I'd did see bubble weather stripping on your site that may work but not sure. My existing weather stripping is foam filled as well.

My window parts are plastic and need to be replaced on the whole house. The fin is 1/2 inches the part that attaches to the vinyl windows is 1/4 inches with two kerns and a clip about 1/8 inches apart each at a ~45 degree angle from the fin. We took a vacation and I lost your last e-mail. Thank you ... (cont.)

The garden window is from JT Windows in Chatsworth, CA (see pic) and the casement windows appear to be Silver Line with Truth hardware since my crank covers appear to be identical to the ones on your site. My casement windows were just painted and the weather stripping was so deteriorated that nothi ... (cont.)

From the pictures above can you identify and supply this type of weather stripping? I'm looking for at least a hundred feet.

Please notice that in the diagram that I printed from your website and edited with the dimensions noted, there is no drip lip as seen in the photos for the top seal. Please let me know if you have anything you think will work for these doors. I will be ordering in bulk if you can help me out!Thanks, ... (cont.)

I have wood double hung windows that have a cross shaped kerf seal. The kerf is about 1/8" and the flange that seals is about 3/16". I haven't seen any similar seals anywhere online, except maybe brush seals. However I've heard that brush seals are not air tight, and I have 35 of these windows so ba ... (cont.)

Looking for weatherstripping for a Pella casement windows

The attached photo appears to be a bubble gasket with a 1/4" bubble and 1/4" straight kerf. I have 27 windows that would require a total of 200' of the white gasket. Please provide the cost plus shipping and estimated arrival time of this type of gasket.