Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

look for gasket for jeldwen casement window

I don't see similar profiles in your video. Can you help me identify what might be a replacement and what measurements are needed for the unusual profile. I cam send the original Milgard invoice with the window stock number if that helps. Thank you!

Need to replace all weatherstripping on 9 3-season porch windows. It measures 1/4'deep and the facing measures 1/4" also. It appears to be flat facing, but it is 34 years old! Looking to determine best replacement fit. Thanks, Jim

Can you provide the window gasket rubber trim ? And any information to help me install the gasket rubber trim and the stops?Roto number on stop is G2-strkr-*11 casement style.Thanks so much wv

Please let me know what weather stripping part I need to replace damaged seals in my Jeldwen casement windows. Thank you

I am replacing the weatherstrip that runs along the the check rail of a Jeld-Wen aluminum clad double hung window. It is a kerf mount bubble seal, with a 5/16" diameter of the bubble and a base extension length of 1/4". I believe that your product# 58-053 is the correct choice, but would you mind ... (cont.)

Hi, do you have something that works for this kerf seal? We will accept black or bronze. Is it possible for you to send samples for what could work?

I have about 20 windows totaling about 50-60'

Let me know if you have this ones will order.. Thanks

IT IS ROUND AT THE TOP AND RIGHT BELOW IT HAS LIKE A ARROW POINTING DOWN

Hi I'm looking to replace the weather stripping on the windows in my house. They are Croft aluminum windows from around 1998. The seal seems to be about 5/16" diameter with approximately a 1/16" spine. Thanks for your help , Mel

Can you help me with replacing this weatherstripping? One is for sliders, the other is for French doors.

Hi, I am trying to identify this seal, can you help tell me what it is?

Hello, I'd like to know if yo can identify this seal and you have it. If you need additional information let me know. My windows are Weather Shield. Thanks

I believe the existing windows are Jeld-Wen. I am looking to source pile weatherstripping for the cross rail, bulb type weatherstripping for the sill and a new compression jamb with internal spring balance. The compression jamb has a failed spring on one side. The jamb is 3-3/8" wide by 73-1/2"/74- ... (cont.)

So... I thought our windows had a bubble stripping, but I found an intact piece during our work yesterday. I looked on the site for "leaf" style stripping... but didn't find a match. Any help finding my window's soul mate? Thanks.

I am looking for a similar product to replace ours, as it is starting to become quite drafty. It doesn't necessarily need to be the exact same, just something with the same type of attachment. In terms of the weather stripping itself, it is basically just three components: the brush, then a rubber ... (cont.)

Looking for trim for the bottom of a hinged exterior door. The base tab is 1/4" long and the bulb appears to be 11/32". Hopefully, you can tell from the pics? At least similar to your product# 58-053 but, looks like the tab is on the edge at an angle.

I'm looking to replace the weatherstripping on my Milgard windows. Milgard windows Series: 3510 casement Product line: 032-167 Please see photos attached.

I have an older home probably mid 1980's with Peachtree Ariel casement windows. They have a 2 piece seal, one which mounts to the frame and one that mounts to the sash. I am attaching a few photos. Let me know if this is enough to recommend a replacement item.