Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

The seals on these windows are in desperate need of replacement. If you have a list of known parts for these windows I'd appreciate any info you have on them! I already have purchased replacement pivot bars for them from you.

Any idea what the replacement is for this?

I would like to purchase some weather stripping for my Truth Windows. They are casement windows and have a weather strip around the rim of the window.The strip itself is best described as a 5/16 hollow rubber tube. At the 180 degree mark there is a tab approximately 1/4 inch long used to attach to w ... (cont.)

The existing bubble weatherstripping is less than 1/4" in diameter? Probably mid 70's to mid 80's windows??.. Thank you for your help?..Lyndy

Total width flattened out with fin 5/8" / bulb measures 3/8" flattened out / I need 4 pieces 57" long and 4 pieces 27" long

Hello Looking to replace weather striping in customer home Hurd window weather striping height 1/2 width 1/4

Good day, I am looking for a Roto weather strip (see photo). Do you have it? If so, could you please tell me how to replace it? Thanks in advanced

I need to replace the rubber weatherstrip on our Pella double glass doors. I believe that it is the 3/8 inch gasket that you sell but want to be sure before ordering. The doors are wide, tall double pane sliding glass doors installed in 1992. Thanks

Do you have a comparable weatherstrip to this? See photo. Thank you

I have about 40 casement windows needing weather seals. the original is pressed into a kerf directly adjacent to the metal window frame. It measures 1/2" inch.... 5/16" press in kerf and 3/16" hollow window seal. By 5/16" wide

I have a Pella door to the deck -- double wide, hinges in the middle, full glass. I am trying to replace the weather stripping/gasket around the door that opens. It is bubble shield style; the diameter of the bulb is 1/2". The width of the base extension is 3/8". It looks just like the bubble shi ... (cont.)

Pella door gasket door #0501 PLCSCVF1Z1-072A081AWHT-615S-NFRC

I need to replace weather stripping for: oak threshold. Designer, quad sliding door, French, fixed/vent/vent/fixed. 140.12

No name, numbers or markings. 1/8" wide kerfs are in the jambs and header as opposed to in the stops as indicated in the sketch. If no direct replacement could you suggest a solution. Thanks

I'm assuming 58-053 would work here. inside bottom rail of upper sash. My only concern is photo of part 58-053 appears rigid - which of course would make no sense for this type of item. Unfamiliar with "santoprene". Photos are 12 years after installation. I'll order if indeed it appears to work. 5 ... (cont.)

I have a wooden Pella sliding glass door. I'm assuming it is circa 1990s? Maybe older? I am looking to replace to the weatherstripping all around the door and maybe get a little more life out of the door. What type do you think I should get?

Wood casement weatherstrip

Door is approximately 20 plus years...there are no markings or name anywhere.. looking to match this weatherstripping

Looking for replacement weatherstripping for wooden windows supplied by Jeldwen in 2004 under name of POZZI. Color black, bulb 0.25 inch, "tail" also 0.25 inch. Need approx 16 feet for one window and probably buy for several more.

I need to weatherstriping got the double hung widows.Each diminsion is 1/2 inch.