Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

Hi, Hoping to find replacement weather stripping for for wooden doors. Hopefully, in black or dark bronze. Thank you, Lauren

Need 90" long piece of the pictures kerf moulding. Beige in color.

Going to need 14 pieces of each of the items below.

We're trying to find replacement weather stripping for most of the Marvin wood windows . They are brittle and the previous painter didn't remove them, so they are painted.

only markings on the windows are on the glass rim "ICI EXP". I also have a flap like part in the jamb header, but have to borrow a step stool to get a pic.Looking to rehab the weatherstripping on 8 windows.

morning wondering if you have these parts? the windows were installed in 1989 this is all the info I could get off them. thank you.

Any idea if you have this? The kerf is 1/4" and the bulb is about 1/2". Thanks, Erik

I have Wenco windows[now owned by Jeld Wen]. The windows are about 25 years old. I am trying the replace the part in the window jam where the pivot post of the window is inserted. This part I believe is called a friction shoe. I am also trying to replace torn weatherstripping in the window. Please s ... (cont.)

Do you carry these grey inside edge white outside edge thanks

This seal comprises two materials: 1. Rigid plastic portion (about 0.25 inches tall) that inserts into a thin slot in the window. Rigid portion also includes a feature about 3/4 inch in length that is intended to mate with the window bottom surface. 2. Flexible rubber portion is round shaped ... (cont.)

Trying to find the correct weather stripping for my double hung windows. Brand of windows unknown

We have Norco wood windows from the early 90s and which the weather-stripping needs to be replaced. The builder and ex owner says the seals have not been replaced so I have no idea why there are two different seals. The white seal is 1/2"LX9/16"W, The black is 9/16"LX1/2"W. Let me know if you need ... (cont.)

I am desperately trying to find the above items for my patio door as the existing locking hardware is now broken. I located the two items on the Weathershield website. The part number they list for the Recessed Lock Raised Jamb Keeper is 972496(and screw part #971452). The part number listed for ... (cont.)

The etching on the glass states that these are Eagle windows manufactured in 1998. I'm not sure what model of double hung windows they are since there is little info out there re Eagle windows. I need 2 types of weather seals as shown in the photos. The 5th photo is A, 4th is B and the others are s ... (cont.)

Do you have this kind of seal for residential window?

Looks like T weather seal. This came from window and I need replacement.

These are wenco windows from the 80s(?) Just replaced the jamb liners and all the vinyl parts between the upper and lower sashes are shot. We have a larger window with sheetmetal in the same spot but it looks possibly home made.

This seal runs along the top and left and right sides of the window frame. Do you have anything that will work to replace it. I have included a photo of the groove in the frame that receives the weatherstrip. Thank you for your help.Marc

Need to replace all the rubber seals on a school active casement windows. This gasket is 1" wide on the face and the ribbed side is 3/8" I am going to need approx 120lf

I would like to purchase some weather stripping for my Truth Windows. They are casement windows and have a weather strip around the rim of the window.The strip itself is best described as a 5/16 hollow rubber tube. At the 180 degree mark there is a tab approximately 1/4 inch long used to attach to w ... (cont.)