Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

I'm looking for replacement weather stripping in the format shown in the picture. Suspect they're Anderson windows but haven't found any identifiers. House was built in 1995

Looking for replacement weatherstripping for casement windows made by Pollard Windows. No information is on the weatherstripping.

8ne igcc cab wi This Is the part number is for the window, I'm looking for the weatherstrip.

Requesting replacement for weather stripping

The bubble is 1/4" and the leg is 5/8" What replacement part should I buy? I have a lot of windows to repair. Thanks Mike G

Hello, I need replacement bubble weather stripping in white for several Milgard casement windows. The extension on the stripping appears to be 1/4" long, the bubble has approx. 1/4" diameter if I press it a bit to round it out. What's my best choice?

Greetings, Can you let me know if I should order the .187 or .270, please. I would like to maximize the seal.

Can you match or provide an alternate to the attached? It's a casement leaf seal.

Hello,looking for weather strip ,for french door. No any stickers just on a glass is GUARDIAN.Thanks

I have some Norco casement windows from 1992 that need new weatherstripping. Here are a few pics. Do you have the correct weatherstripping or recommendation of another solution? Thank you

Please help me identify this plastic weather stripping for wood sliding door beige color. hard vinyl material

Looking for replacement seals for a number of windows. These are Pella from about 1987 or so. I wanted to show some pictures before removing the seal from the window to see if it is anything obvious. I need Sliding door seals too and will try to get a picture and measurement for that later. ... (cont.)

Looking for replacement weather stripping for pozzi windows cased type window

This small insulation strip fits in a track between the up and down window. The insert to the window track us 1/4 inch wide with two grooved flanges.The bubble compressed but looks like it was 1/4 inch or less.Images are above Do you have a replacement insulation strip please send part numberPs I'll ... (cont.)

This is Millard sliding door weatherstripping from 2004. It goes where the two doors meet. The width is about 1" (27mm), the arm height is 0.45 inches (11.4 mm) and the bubble is about 0.4 inches (10mm). The only label I could find on the frame is enclosed as a photo.

My phone number

I need to replace the bubble seal weather stripping for some Marvin windows that appear to be circa 2001. the aluminum spacers on the glazing as marked "Marvin MN Usa 01" they are wooden double hung windows. existing bubble is shown: Bubble is ~ 1/4" in diameter, offset just over 1/8th, and 1/4" ... (cont.)

I'm trying to find out the exact weather strip for my pella sliding door

Hello, I'm in need of new window seals as per the attached photo. I think the original is Vinyl. It currently snaps into a wood window frame. The dimensions are as follows: 9/16" x 3/8". Do not hesitate to contact me if you should have any questions. Thank you! Mike

Looking for replacement Exterior weather stripping and or sweep for Simonton Windows