Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

Looking for replacement seals for a number of windows. These are Pella from about 1987 or so. I wanted to show some pictures before removing the seal from the window to see if it is anything obvious. I need Sliding door seals too and will try to get a picture and measurement for that later. ... (cont.)

Looking for replacement weather stripping for pozzi windows cased type window

This small insulation strip fits in a track between the up and down window. The insert to the window track us 1/4 inch wide with two grooved flanges.The bubble compressed but looks like it was 1/4 inch or less.Images are above Do you have a replacement insulation strip please send part numberPs I'll ... (cont.)

This is Millard sliding door weatherstripping from 2004. It goes where the two doors meet. The width is about 1" (27mm), the arm height is 0.45 inches (11.4 mm) and the bubble is about 0.4 inches (10mm). The only label I could find on the frame is enclosed as a photo.

My phone number

I need to replace the bubble seal weather stripping for some Marvin windows that appear to be circa 2001. the aluminum spacers on the glazing as marked "Marvin MN Usa 01" they are wooden double hung windows. existing bubble is shown: Bubble is ~ 1/4" in diameter, offset just over 1/8th, and 1/4" ... (cont.)

I'm trying to find out the exact weather strip for my pella sliding door

Hello, I'm in need of new window seals as per the attached photo. I think the original is Vinyl. It currently snaps into a wood window frame. The dimensions are as follows: 9/16" x 3/8". Do not hesitate to contact me if you should have any questions. Thank you! Mike

Looking for replacement Exterior weather stripping and or sweep for Simonton Windows

Hi, Hoping to find replacement weather stripping for for wooden doors. Hopefully, in black or dark bronze. Thank you, Lauren

Need 90" long piece of the pictures kerf moulding. Beige in color.

Going to need 14 pieces of each of the items below.

We're trying to find replacement weather stripping for most of the Marvin wood windows . They are brittle and the previous painter didn't remove them, so they are painted.

only markings on the windows are on the glass rim "ICI EXP". I also have a flap like part in the jamb header, but have to borrow a step stool to get a pic.Looking to rehab the weatherstripping on 8 windows.

morning wondering if you have these parts? the windows were installed in 1989 this is all the info I could get off them. thank you.

Any idea if you have this? The kerf is 1/4" and the bulb is about 1/2". Thanks, Erik

I have Wenco windows[now owned by Jeld Wen]. The windows are about 25 years old. I am trying the replace the part in the window jam where the pivot post of the window is inserted. This part I believe is called a friction shoe. I am also trying to replace torn weatherstripping in the window. Please s ... (cont.)

Do you carry these grey inside edge white outside edge thanks

This seal comprises two materials: 1. Rigid plastic portion (about 0.25 inches tall) that inserts into a thin slot in the window. Rigid portion also includes a feature about 3/4 inch in length that is intended to mate with the window bottom surface. 2. Flexible rubber portion is round shaped ... (cont.)

Trying to find the correct weather stripping for my double hung windows. Brand of windows unknown