Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

This is a worn piece of the weather stripping arounf our front door. We need 17 feet to replace it. Can you identify it?

couldn't find any names or number anywhere.. the weather stripping is on the interior side of the slider enclosure the total width of the stripping is 5/16" and the piece that installs into the kerf is 1/4" thanks for your help

Looking for the weather stripping in photos. It's similar to kerf weather stripping but a little different. I believe the windows were manufactured in February of 1996. Thank you for your help

Hi Im replacing weatherstripping in my 40 year old house, see pics. do you sell this? thank you

Shown with a sample of a commonly-available (Lowes, Home Depot, Ace) foam strip. The foam is way too thick so the door won't close, even if I cut off the tabs on the kerf so it fits in the frame.

3/8" wide leaf portion with 1/4" plunging portion that comes out from center of leaf portion

I have casement windows that were installed in 1983. The windows are in good shape and requires the replacement of the weather stripping. I have posted a pic of the weather stripping profile. The "bubble" portion is flexible plastic and the insert portion is a very brittle hard plastic. Any ideas wh ... (cont.)

Picture is cross-section of window seal. Located on top sash along the bottom, facing inside. Fairly rigid yet flexible. No markings. No numbers. Ghost part. ;)

Hello, I need 25 feet of each of these weather strips. I cannot find a name on the door so I hope your can match them by the photos. The door measures 80" tall x 71" wide. If they come in 7 or 8 foot lengths I would need 6 of each. I'm repairing two doors.Thanks for your help.Dave ... (cont.)

Hello, Please assist in identifying this type of weather stripping. Thank you, Andrew

I have a home that was built in the 80's and the seals and cranks are wearing, windows are still in good shape. i have a number of cranks that are 7 1/2" long and shorter arm is around 4 1/2" The outside seals are hard and gone but the few that are let are a dome seal "D" Can you assist in getting ... (cont.)

Windows age 1997Do you have a replacement product that will fit

Can you help me find this product that goes on my kolbe and kolbe casement windows

Here are pics of my weatherstripping, They are from Pella casement windows,they fit into a slot,wondering if your bubble seal would work. the piece that goes into the slot is 1/4" and the seal itself is 3/16"

Do you have the weather stripping as the pictures attached? I need a large amount of these in white

Hello I am looking to replace missing weather stripping/glazing Ion my Semco Casement window. Attached are photos. Let me know if you carry this. Thank you

Do you have this weather stripping?

I am looking for a replacement weather seal for my Windsor double hung windows. It fits into a slot on the bottom of the window to prevent bugs and water from getting in underneath the window. The house was built around 2003. Thank you! Jenny

I'm looking for replacement weather striping for casement window along the bottome of the window. I believe they are Pella windows. Likely new when house was built in 1993. Attached are a couple pictures of the profile and I drew a picture with dimensions. Let me know if you can identify the str ... (cont.)

Can you tell me if you have this weather strip and do you know if all four sides of a Pella Slider will have the same seal? This one is from a double Pella slider vintage year 2000