Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

We are looking for replacement weather stripping for a window, its quite old so if there is a different item that would work in place of it that would be fine. It is about 5/8" wide. Thanks in advance. - Alyssa

We are looking for this weather stripping for our bay and bow windows they are an allied window but we haven?t been able to locate any. Your help would be appreciated. If you have this I will have my husband measure how much we need. Thank you

I can?t find the match. Can you help?

I need replacement vinyl bead for wood awning windows. This is a small piece measuring 1/4" on the groove insert portion and less than 1/2" on the seal portion. Please let me know if this is readily available.

5/8" wide

I am looking for this replacement. 20 year old wood clad windows. Leg on press fins is 9/32 long. Inside dimension of saddle is 5/16. Any luck?

Need to replace windows weatherstripping for wood casement window (has heat guard label on window) due to unpleasant smell of it. Not able to identify replacement on your website

Weather stripping both straight and angled for bottoms sash

Hi, I?m looking to replace the weatherstripping on my windows the peices have split apart. The close up piece is,from the vertical right side of frame. I have glider windows. The next 2photos are of bottom horizontal view, of window, the left side is cracked. I?m not sure how to remove the remo ... (cont.)

Looking for replacement weatherstrip for wood window with aluminum cladding in house from the 1990's. Windows are side opening with a crank and in great shape, but the weatherstripping is curling and yellowed. The bubble is .213" in diameter, the height of the insert is also about .210". Overall ... (cont.)

I think these are Anderson windows from the mid 1980's. I can't find markings on the corner of the glass. The seals are literally falling apart. The one piece intact that is shown in my fingers is approx.9/32"-5/16". I have 9 windows to do once we determine the correct product. I'm thinking the prod ... (cont.)

20 year old Pella casement windows. Could not find any info on them, a couple pictures included. Let me know if you need any measurements. Thanks.

Foam 5/16? ?Leg? 5/16? Fins 1/4 hard plastic

I have norco double hung windows installed in 2002. the weather stripping on the top window is breaking on many windows. I am hoping you can help me find replacement weather stripping. Many thanks for any help. I don't see any markings on the windows.

Good Afternoon. I'm hoping that you can help me identify this weather stripping, as well as sell it. The arrow-looking 'stud' portion is 3/8", and it makes a 90 degree turn that is about 1/2". Thank you for your assistance. Matt

I need replacement strip for base of Pella entry door. It is a push-in type weatherseal purchased 10/2014 serial number 102914 P0610351041 NFRC PEL-M. I tried to upload a photo of a cross-section and the red button did not work. It

sending a pic of my weather stripping.The rubber circle is about 8/32The tab that goes into the window slot is 9/32 The little tab on end is 3/32The length of the length of the tab from the center of the round circle to the tap that goes into the window slot. is 9/32I need about 48 feet. i.e. each w ... (cont.)

Hi, I ordered replacement weather stripping 58-055. The weather stripping is not exactly the same one. I'm wondering if there is an exact replacement? Image 7977 is the original weather stripping. Image 7981 is the new replacement weather stripping I ordered next to the original. Do you have anythin ... (cont.)

Please see attached and let me know if you have these profiles.

I thought 55-055 would be the correct replacement...close but no cigar. The window has a "T" channel. Do you carry anything similar that will work with CertainTeed windows? Approx 18 years old. T channel is 3/16 wide. T to tube base height 1/4"