Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

Wright window. Next to window pane has OD132HM887?On hardware I see 09700 , 09766. Terry

Pls see if pics adequate for u help me with stripping for Wright inner and outer stripping. Thank u! Terry

Sorry about the first two rotated images. Both the whitish stationary strip (first two images) and the strip (next three images) I pulled out of the moving frame need replacing. Windows are about 30 years old. I don't see a brand on them. The brown strip is about 1/2" on the flexing part and ab ... (cont.)

looking for replacement weather stripping for a patio door that has no identification.

Gents: I am sending you the attached images in hopes that you can confirm that the weather stripping that goes on the operating casement window is #55-106 and that the bubble weather stripping that goes on the actual window frame is #58-055. Do I also understand that 55-106 is only available in whit ... (cont.)

Need to replace the weatherstripping between my bay windows

This is a pic of door weather strip Do you have anything like it ?

Ideally, I would need four 27" pieces of this weatherstripping. Thank you in advance for your assistance.

I have two types of seals on my windows. One looks like the kerf mount 5/16" bubble seal. The other is a foam filled weather seal, but I could not identify the exact part on your website. I uploaded a detail of each part with dimensions along with pictures. Should I be using both of these seals ... (cont.)

I hope you can help me out finding a replacement weather sealing in the attached photos. The age of the windows may be prior to 1990.Thank you David

The two photos attached are of weather stripping I have on my windows that were installed when our house was built in 1987. I intend to replace the weather stripping in all 15 of my windows if I can get replacement stripping. If you have weather stripping that you think will work for my windows coul ... (cont.)

described in attachment. insert leg is 1/4" long.

I need to replace the weatherstripping on two casement windows. There are no marking of any type on the window to indicate the brand. My measurements of the weatherstripping came out to: 7/16" wide and 3/8" high wcich you can verify on the photos. channel is 1/4" high/deepThank you for your assistan ... (cont.)

Hello, Do you sell this type of weather stripping or have anything compatible? Your help is greatly appreciated. thank you

Good afternoon. I have craftline double hung windows. The bottom window has a weatherstrip that is semi ridgid and slides into place. Mine are brittle. Here are two pics , one is of the shape( basically an offset T with the bottom of the T having a small hook shape), the second pic shows the seal si ... (cont.)

Looking for replacement gaskets for Weathershield Casement+Awning windows. Attached are pics of the C-Channel/exterior and interior seals and measurements. Thank you!

Thank you for your help Tony

Hi, I am trying to locate replacement weatherstripping for the frames for what may be Caradco windows from the mid-80s. All are kerfed. The sides and tops of the frame have a z-shaped rigid component with a +/-¼" flexible bulb (#1 in the diagram), and the the bottoms have a u-shaped rigid component ... (cont.)

some of the windows say MW and there are some numbers on the crank to open the window. Most of these windows are casements and older wood. I think her house was built in the 1990s .I am pretty sure the one I ordered a piece of is correct but did not see this one on your web site.thanksLinette ... (cont.)

Hi - I am looking for this window seal. I have not been able to locate it anywhere on the internet.