Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

I was on your web site and it looks like you may be able to help me. I had Jeld Wen aluminum clad wood windows installed in our new construction house in 2006. The weather seals have deteriorated on a lot of them. I contacted Jeld Wen and the said they don't have new weather seals for their older (1 ... (cont.)

Hi, Good luck! Are you able to match these two Kerf Type bubble seals? Or maybe similar? And are these pics adequate or need additional ones? The measurements are my best guess with a caliper. Both of these have what feels like silicone fins on the Kerf projection. The Small seal is 0.20 (5mm) ... (cont.)

Hello again! this is the second piece of brown weatherstrip from the same hung window. It runs horizontally in a groove along the very bottom of the window. That's it. I hope you can help. Thanks!

I am looking for a replacement for this type of T-channel bulb weather seal. The width of the backing is 5mm, and the height of the bulb measured from the base in cross section is about 6mm. Will need about 18 ft. This is a casement window with hurricane glass. Thanks!!

The weather seal is held in a saw kerf in the edge of the window for the wool style and in the top or bottom for the tube style. We bought these wood, double hung, 8 over 8, single pane windows from Horner Millworks in Somerset MA in 2001.

I am looking for a bulb style seal to replace my old vee flap seals on my crank out windows. What do I need to provide as far as numbers to order seals. John

Manuela A. requested these pictures of our Crestline window seals.

Sliding door in los altos hills

These Anderson Casement Windows were installed in approximately 1969. I could not find any identifying marks on them. I am including the best pictures I could get of the seals. The window box has seals on both sides and the top. The window itself has a seal on the bottom of the window. ... (cont.)

Hello! I am looking for replacement weatherstripping for a 1992 Jeld Wen window. Any color. Thank you Vanessa

These is a piece of weatherstripping from the casement windows in our house. It is very thin and narrow, perhaps a 1/2 thick max. It has a kerf and I'd like to find something that is close to it.

Has a 1/4 insert to go in wood casement the top is 3/8 goes up against wood and a 1/4 inch ball vinyl Please let me know if you have this or one that will work Also let me know the length it comes in and the price

I have Marvin double hung windows (EZ Tilt) which were installed about 1990. As you can see from the attached photo, the weatherstripping on the bottom of the inner sash is totally shot. I believe there was originally a soft round vinyl bulb that flattened against the jamb when the window was closed ... (cont.)

not sure but I think this is from a Andersen window. Thank you, Darwin

Looking for replacement weatherstripping for Jeld Wen windows for a house built in 1989. Snap in groove base is 1/4 inch wide. I have checked several local retailers with no luck. I hope you can help me. Thank you

This is from a Jeld Wen aluminum clad wood casement window serial #G0906451432500 CG-9 3-06 Lo-E. 5/16" bulb diameter and 1/4" base height. Would like to replace it with white. Thanks, Bob

My name is Dimitri, See my pictures of weather stripping in my home. Looks like you carry two out the three but can but can’t find the third one. Looks white one the picture and it goes in the middle where the two windows meet.

Please see the attached files.

I am looking for weather strip for my Crestline casement window made in 1994. Cheers Mike

We have Weathershield casement windows on our home that was built in 1987. We are looking to replace the weatherstripping on a few of the windows. I have attached a photo Any help you can offer would be great! Thank you! Karen