Viewing all customer Discussions for:

70-008 5 Pack, Screen Plunger Pin Latches, 7/32"

1-3/16" long; 1/8 " at one end; 3/16" at the other end, with what appears to be a spring wound around the narrower end. May be a fragment. I think it may be one of two pins that hold the screen to the window frame. In any case, i need four replacements.Thank you,Les

I have several missing or broken pins that hold my window screens in place. They retract to insert the screen, then engage a hole in the window frame when released.

I'm looking to replace my plunger pins on my screen windows. I was hoping you could identify which ones I need. I've included two pictures. Thanks

Need around 40 screen pins

I am lookinf for the clips that attach a screen to the trim of a window

Hello,My channel balance window screen panel screw was broken (see 2nd photo comparing with the 1st one), and the window side "clip" (not sure the exact name) which can hold the window was missing (see the 3rd photo comparing to the 4th one). Can you please help me to identify the parts names as soo ... (cont.)

I am looking for screen pins for Marvin double hung windows. The pins are about 1.6" long. The diameter of the pin opposite the plunger is 0.1625" The diameter of the spring portion of the pin is 0.12" The diameter of the narrow portion of the plunger is 0.195" The diameter of the wide portion ... (cont.)

Good afternoon, This is what it looks like. It sits on the outside of the window and the corners clips on the inside of the flange at each corner. The middle has a pen lock, that also locks behind same flange as corners. The corners are about 1in x 1in The track is also about 1in ... (cont.)

I didn't see any of the coil balances that look like this and was wondering if this is something that you can source if I could take one out

Hi, I have Superseal Series 1650 and 1850 windows ans screens from 2002. I need these little pins that hold the screens to the window panes. Not sure how to take them out to show you. Feels like a spring us behind cap.

Screen window part

Hi, Trying to identify the correct replacement part for Marvin Integrity Screen Pins in the year 2012. As per your posts could be 70-008 or 70-009? Or a different number altogether? Please advise. Muki

I have Marvin windows manufactured in 1990. The windows are fine, but the screens have pull plugs, and a number of them have failed, looking to replace. the screen frame width is 3/4 inch. the pull plugs measure 1 9/16 inches. thank you for your time/advice.

Hello, do you have screen clips and screen springs for casement screens to stay in better?? need this style exactly.. See pic Let me know, thanks!

I have a screen with only one plunger pin left. Unsure of size

Screen window plunger opening 1/4" and 1/8"

I have a couple triple track storm window systems and the screens are gone. I was not able to find any markings on the frames so I need to reproduce them. They pivot from the top and have spring loaded latches at the bottom. I hope the 3 pics are sufficient to show what I need to recreate them. I ne ... (cont.)

I am trying to successfully complete a weekend "Bob Villa" DIY replacement of our Marvin Screen Plunger Pins. Hos do I determine which screen plunger pin (7/32" 70-008) or (5/32" 70-009) will fit my Marvin screen?

Hello I was trying to find 2 window screen pins. They are at the top of the screen and stick in 2 holes at the top of the window sill. Thet help hold the window screen in and the screen was put in in 1984 . Thanks

looking for replacement plunger pins for caradco window acreens in white